Question about 2000 Jeep Grand Cherokee

Open Question

Transmission fails cherokee xj - 2000 Jeep Grand Cherokee

Posted by Anonymous on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 jeep cherokee p1898 p0700


read the SM yet,
its free,
here it is again, posted over 300 times
p0700 means your scan tool is a toy. (place marker for A/t failures)

USA cars
XJ jeep
http://www.morris4x4center.com/knowledge-base/index.htm?utm_source=cj#service

1899 right> typed wrong?

tells you the park /neutral switch is bad, PRNDL
the book also shows, where that is and now to remove it.
"transmission"

Mar 13, 2017 | 1997 Jeep Cherokee

1 Answer

How to synchronize first gear in a 97 xj cherokee


Synchroniser is worn out. Repair requires disassembly of transmission. You can shift more easily with a worn synchro if you match the engine rpms to the transmission input shaft rpms when you shift.
Also could be that it just needs a clutch or clutch adjustment. Check to be sure clutch reservoir has enough fluid.

Jul 02, 2014 | 1997 Jeep Cherokee Country

2 Answers

Electrical circuit diagram for jeep cherokee 1995 xj sport


You need review the Jeep XJ Repair Manual:
- Section-8WL-Wiring-Diagrams-General-Information-95XJ8WL
- Section-8WR-Wiring-Diagrams-95XJ8WR

Hope helped with this (remember rated this help) Good luck.

Nov 19, 2009 | 1995 Jeep Cherokee

4 Answers

Change transmission fluide in 1999 Jeep Cherokee


To change the transmission fluid you drop the transmission pan should be about 16 bolts. Once that is off you will see the filter. Buy the kit from a local auto parts store and look to see what the filter looks like. Check your transmission fluid once you drain to see metallic look in it if so i would suggest a transmission flush.

Sep 22, 2009 | 1999 Jeep Cherokee

2 Answers

Where can i find the transmission model number for my 95 jeep grandcherokee lerado the transmission is not original it has been replaced with a diferent one 2 times so just need to know where to find the...


These pages cover the transmissions used in Jeeps over the years. Transmissions are arranged by the most recently introduced transmissions first.
Factory Transmissions 45RFE: The 45RFE four speed automatic transmission was used in 1999 Jeep Grand Cherokees with 4.7L engines. 46RE: The 46RE four speed automatic transmission was used in 1998 Jeep Grand Cherokees with 5.9L engines.
44RE: The 44RE four speed automatic transmission was used in 1996 to 1998 Jeep Grand Cherokee's with 5.2L engines.
42RE: The 42RE four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.
46RH: The 46RH four speed automatic transmission was used in 1993 to 1995 Jeep Grand Cherokees with 5.2L engines.
32RH: The 32RH three speed automatic transmission was used in 1992 to 1995 Wrangler with 4.0L engine and it continues to be used in 1997+ Wrangler with 4.0L engine.
30RH: The 30RH three speed automatic transmission was used in 1992 to 1995 Wrangler & 1992 to 1996 Cherokee with 2.5L engine.
AW4: The AW4 four speed automatic transmission was used in 1987 to 1990 Jeep Cherokee (XJ), & Jeep Comanche with 2.5L & 4.0L engines. The AW4 was also used in 1987 through 1992 Jeep Comanche & 1991 through 1998 Jeep Cherokee & 1993 through 1993.5 Jeep Grand Cherokee with 4.0L engines.
AX-15: The AX-15 is a medium duty 5 speed manual transmission. It was introduced in mid 1989 in YJs with the 4.2L engine and XJs and MJs with this engine. The first year of the Grand Cherokee (ZJ), the AX-15 was rare option only with the 4.0L engine. The AX-15 is still used in TJs and XJs with the 4.0L engine.
AX-5: The AX-5 (and AX-4, the non-overdrive version) is a light duty 5 speed manual transmission. It was used in all Wranglers from 1987 equipped with the 2.5L I4 engine. It was also used in Cherokees (XJ) and Comanches (MJ) with the 2.8L V6 and 2.5L I4.
BA10/5: The BA 10/5 is a light duty 5 speed manual transmission. It was used in all 4.2L equipped Wranglers (YJ) from 1987 to mid-1989, and all 4.0L Cherokees (XJ) and Comanches (MJ) for the same years.
T-5: The T-5 is a light duty 5 speed transmission used in CJs from 1982 until 1986. It was also found in some 84-85 Cherokees (XJ).
TF727: The TF 727 is a heavy duty 3 speed automatic used in full sized Jeeps (SJs and J series pickups) from 1980-1983. From 1984-1992 the 727 was only used in these trucks with the AMC 360 V8.
999: The 999 is a medium duty 3 speed automatic used in CJs from 1980-1986. It was also used in 1984-1990 SJs and J pickups with the 4.2L engine, in the YJ from 1987-1991 with the 2.5L and 4.2L engine, and in the XJ and MJ through 1986.
904,909: The 904 and 909 are light duty 3 speed automatic used in CJs from 1980-1986 only with the I4 engine. It was also used during this time period with XJs and MJs with the I4 and V6 engine. The 909 is a 904 with a lock-up torque converter.
SR-4, T-4: The SR-4 and T-4 are light duty four speed manual transmissions used in CJs from 1980 until 1986.
T-176, T-177, T-178: The T-176, T-177, and T-178 are a medium duty four speed manual transmission used in Jeep CJs, SJs, and J pickups from 1980-1986.
T-150: The T-150 is the 3 speed manual transmission that was used in CJs from 1976 to 1979.
T-18: The T-18 is a heavy duty four speed used in Jeeps from 1971 until 1981. It was only used in the CJ from 1971-1979.
T-15: The T-15 was used only in V8 equipped CJs and Jeep trucks from 1972 to 1975.
TH400: The TH 400 is a heavy duty three speed automatic that was used in CJs with the BW 13-39 transfer case from 1976-1979. The TH 400 was also used in full sized Jeeps (SJs and J series pickups) from the late 60s until 1979.
T-14: he T-14 is a three speed transmission used with the "Dauntless" Buick V6 and AMC I6 from 1967 to 1975.
T-86: The T-86 is one of the three speeds used with the many CJs and Jeepster Commandos with the "Dauntless" Buick V6.
T-98: The T-98 varies only slightly from the T-18. It was used from the 50s until 1970 in different Jeeps.
T-90: The T-90 was the standard three speed for CJ and their military counterparts built from 1945 until 1971. It was also the standard transmission for Willys Wagons, Willys Pickups, FC trucks, and Jeepster/Commandos during this time period.
T-84: The T-84 is a light duty three speed used in MBs and GPWs during WWII

Good luck!!!

Jun 26, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Manual for jeep cherokee '92


Hi
In this link you can find several docs about Jeep Cherokee XJ, not exactly of '92, but may can help you: Jeep Cherokee XJ - Sections Repair Manuals

Good luck.

May 26, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Possible transmission problems on 92 cherokee (xj)


If the Jeep sat for 3 years, u may have brake issues, which is why it won't move when u put it in gear. The brakes may be dragging, or partially seized. U can jack up one wheel at a time, block all other wheels so it won't fall and kill u, w/ trans in neutral try to spin the wheels by hand. If u can't or there is a lot of effort needed, check out the brakes. Calipers and brake cylinders may need to be replaced, and u should also flush out the brake fluid, or your new calipers and brake cylinders will eventually corrode and seize again.
Where is the knocking sound coming from. the engine?

Mar 18, 2009 | 1989 Jeep Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...