Question about 1994 Jeep Grand Cherokee
Posted by Anonymous on
I had the same problem and had to kinda figure it out on my own. I have a 98 grand cherokee and I think they should be the same. Inside the drivers door panel there are 3 buttons... a number 1 and number 2 and a SET button. Hold down the set button for a couple seconds then release. Then adjust your settings on your seat and mirrors to what you want...Then press # 1. If you have another person that will be driving the car do the same and press number 2...
The thing is...........There are 2 key chain things issued with each car...One will be the number 1 driver, the other one is the number 2 driver...So...I would program the number 1 driver first and see which key chain thing works...then you will know the other one will be for the number 2 driver.
Hope that made sense...It is a great feature once you finally figure it out. Sheri
Posted on Mar 30, 2009
if you have an original working fob and your owner's manual,it will explain procedure,otherwise will have to go to dealer to be programmed
Posted on May 17, 2009
CHANGE THE BATTERIES IN THE FOB, PUSH SET THE SET BUTTON ON HTE DOORIF THE FOB IS BLACK IT IS 1 AND GRAY IS 2, SET THE SEAT THEN PUSH THAT NUMBER
Posted on Jun 16, 2009
Tips for a great answer:
Jan 20, 2013 | 1999 Jeep Grand Cherokee
Oct 27, 2011 | 1997 Jeep Grand Cherokee
Jun 22, 2011 | 1997 Jeep Grand Cherokee
Oct 01, 2010 | 2008 Jeep Cherokee Grand
Jun 02, 2010 | 1999 Jeep Grand Cherokee
May 05, 2010 | 1996 Jeep Grand Cherokee
184 people viewed this question
Usually answered in minutes!