Question about 1999 Dodge Ram 2500 4WD
How do i replace the tps
SOURCE: 2001 dodge 2500 v10 has low idle
On my 06 v10 there is a idle adjustment screw at the linkage on the throttle body.
clean air filter
clean sensor in the air intake ram
try some 93 octane
Posted on Feb 04, 2009
you need to pull off wheels,brakes, rotor /unit hub bearing, both axles and intermediate shaft, as well as the vac disconnec ton the front axle tube. if only the right side leaks then only then only pull the right axle and intermediate shaft and vac disco. it is a trick with a miller tool to replace the seal. the left side seal is inside the diff and the carrier has to come out to replace it. pete
Posted on Jun 26, 2009
you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.
Posted on May 18, 2010
It's in the fuel tank, no service, only gets replace if fuel pump goes bad, fuel filter is part of the fuel pump, comes as one unit only.
Posted on Jul 22, 2010
SOURCE: 1999 Dodge Ram 2500 Diesel 4x4
check engine light on code says speed senceor this sounds right sents speedo not working so i changed both the sensores but still check engine light on and speedo and cruise not working
Posted on Jun 23, 2011
Tips for a great answer:
Jun 25, 2014 | 2001 Dodge Ram 2500 Truck
Dec 07, 2013 | 1999 Dodge Ram 2500 4WD
Jan 25, 2012 | 1999 Dodge Ram 2500 4WD
Jan 21, 2011 | 1999 Dodge Ram
Nov 28, 2010 | 1999 Dodge Ram
May 18, 2010 | 2001 Dodge Ram 2500 Truck
Jan 11, 2010 | 1999 Dodge Ram 2500 4WD
May 21, 2009 | 1999 Dodge Ram 2500 4WD
128 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: