- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Suspect the clutch is frozen and even when you press the pedal it does not disengage. If it shifts into other gears without the engine running. you will need to break the clutch free. Put it is high gear with the clutch depressed and rock the car back and forth with a bunch of friends pushing on it.
do you mean it wont go into gear ? if so what gears ? it could be the clutch going out , if the pedal is soft or easy to push down than it probably needs a clutch. next time it wont go into gear try pumping the clutch or putting it from 2nd to 1st or what ever gear it has problems with
Have you just replaced the clutch? Taken out the transaxle, and put it back in? Are you sure transmission was in good condition before this? If so, review your procedure carefully to be sure you got it all back right. Watch the slave cylinder while someone depresses clutch. You should see the little plunger move slightly out and move the clutch lever back. The lever moves the release bearing inside bell housing into contact with the pressure plate. If slave cylinder doesn't move at all, try bleeding again. The plunger has to move when clutch is engaged. I'm not sure what you mean by "will shift but won't go into gear". You mean it's actually going into a gear position and car won't move? Or it won't go into any gear, period. As if you had no clutch?
If the Gear is truck into unless the clutch disengages it wont shift. So start the car move slightly- if no space is a avialable jack up and let the drive wheel move- now shift the gear after depressing clutch. It must shift over now. If not repeat while the drive moves. You can now shift the car to forward gear .
if you can shift gears with car off might be the clutch or slave cylinder. If you can start the car in gear,clutch pushed in and doesnt try take off probally not slave cylinder. But if it tries to take off,slave cylinder. Now if it doesnt try to take off,ease clutch out. Does it move or just rev up? If it revs up likely the tranny. But if it moves can you shift thru all gears,if so clutch is shot.