Question about 2003 Ford Focus
Posted by Anonymous on
This website www.reliable-store.com has the largest collection of repair, service, parts manuals of any vehicle
on earth. Best website I came across for manuals.. Also have live assistance
Posted on Mar 08, 2018
Tips for a great answer:
Jan 24, 2016 | Ford Cars & Trucks
Jan 05, 2016 | Suzuki Cars & Trucks
Aug 27, 2013 | 1997 Cadillac DeVille
Aug 01, 2012 | Mercedes-Benz Cars & Trucks
Jan 07, 2011 | 2000 Buick Century
the Steps on how to replace license plate light on your car.
Open the trunk and locate the trunk liner retainer clips.Use the
Phillips head screwdriver to loosen the center plastic screw of the
retainer clip about 1/4 turn, just enough to raise the head of the
screw from the base of the clip. Pull the screw up, and lift the
clip out of the liner. Use a flathead screwdriver to help pry it
out. Remove enough of the clips to allow access to the license plate
light sockets. Pull the liner back.
Remove the emergency trunk release handle by popping off the top
cover of the handle. Use the needle nose pliers to gently squeeze
the prongs on the shaft, while removing the handle.
Unplug the wire harness from the license plate light bulb socket the
release clip on the side of the outlet.Twist the license plate light
bulb socket 1/4 turn counterclockwise, using the needle nose pliers
again. Do not apply too much pressure to the pliers; you may damage
Remove the bulb from the socket, and replace it with a new one.
Replace the socket into the socket assembly, and plug the wire
harness back in. Test the bulb by turning on the lights of the
Corolla, then turn them off again.
Replace the trunk emergency release handle, and replace the hood
liner and the retainer clips. Remove the old bulb and tools, and
close the trunk.
Dec 22, 2010 | 1995 Toyota Corolla
Oct 17, 2010 | 1989 Ford Mustang
Jul 08, 2010 | 2001 Ford Focus
Sep 23, 2009 | 2003 Ford Focus
Mar 07, 2009 | 1997 Cadillac DeVille
107 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: