Question about 2002 Acura 3.2TL
Posted by Anonymous on
SOURCE: brake lamp is on
when the brake light is on it usualy means one of two things. First one is parking brake is on, second is low on brake fluid. More then likely time to change brake pads or could be leak in the system.
Posted on Dec 06, 2008
The Maint Req Light is only a reminder light to get the Oil changed and fluids checked and what nots.. Its on a timer that must be reset.. Its no big deal if ya had it seviced recently.. Heres how to turn it off: 1) Make sure Key is Off 2) Press and Hold Mileage reset button. 3) While Holding Milelage Reset button, swicth car to run, but dont crank..4) Continue to hold button until light flashes and goes off.. then switch it off .. Start the engine to make sure it worked.. Sometimes ya gotta do it twice.. NOW.. And ur Lamp indicator.. Means you probably have a brake light or turn signal bulb out on the rear.. Get someone to help ya look for that.. Lemmie know if this works.. and Take care.. Thanx
Posted on Mar 11, 2009
SOURCE: my brake lamp light is
DiD you say that the brake light is ON, if so the brake switch on the servo master is faulty.
you will have to check for a short in the pressure switch .
Posted on Sep 27, 2010
Tips for a great answer:
Sep 21, 2012 | Cars & Trucks
Mar 16, 2010 | 1999 Acura TL
Apr 09, 2009 | 2002 Acura 3.2TL
Apr 04, 2009 | 2003 Acura RSX
Dec 07, 2008 | 2002 Acura 3.2TL
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: