Where is low pressure port on 2010 gmc arcadia ac

Il est possible de trouver un sch?ma de c?blage pour la radio d'usine GMC Arcadia AWD 2010 aupr?s d'un concessionnaire GMC ou un atelier de r?paration automobile agr??, ils ont acc?s aux manuels techniques et aux informations de c?blage pour les v?hicules GMC. Il est important de noter que les travaux de c?blage de l'?lectronique de voiture doivent ?tre effectu?s par des professionnels exp?riment?s, car une mauvaise manipulation peut causer des dommages au v?hicule et mettre en danger les passagers.

That is located in the larger of the two refrigerant lines coming from the AC compressor also called the low pressure side.

To answer the question I would need to know which engine you have but you should be able to find the answer here.
This tool has drop downs to put all the vehicle info in then tells you where to look.
Find Your Car Low Pressure AC Port On Many Makes And Models

I think on your truck it's part of the accumulator and should be a port right on the top.
MOTOR Online Vehicle Information Library LogIn

We're can I fine the low pressure cap in a Chevy AC traverse

My ac light is blinking, and the ac compressor clutchpulley is not engageing. Its also blowing hot air

The low side port of the 2005 GMC savanna Van is located on the low pressure side of the compressor.

This is found by locating the compressor driven by a belt that has a clutch that engages and disengages as the a/c cycles.

The low pressure piping is always in the larger diameter piping, and the high pressure side is always contained in the smaller diameter piping.

Therefore, follow the thick pipes from the compressor up to the accumulator, which looks like a large can of soup. On the accumulator receiver/drier is a port that connects to the tube that is connected to the can of r134a freon refrigerant.

Simply quick connect the tube to the low side port, which is located on the 'thick' tubing or on the accumulator and then fill until the low side pressure is 25 psi to 45 psi while the compressor is running.

When the car is off and the compressor is not running, the pressure should be 75 psi to 100 psi on a hot day.

Hopefully the system doesn't have a leak slow or fast in it.

the large ac line is the low pressure side the port is between the compressor and the firewall this is where you charge from

The low pressure side has a blue cap on it, and is smaller than the high pressure side.

It is located under the hood in the larger of the 2 AC lines, this large line is the low pressure line, also check on the round can the low side line connects to as it can be on that as well, that part is called the Accumulator/reciever drier