Camshaft caps torque settings - 1995 Volkswagen Golf

The camshaft cap torque specifications for a 2013 3.5 Maxima are as follows:

• Camshaft Cap Bolts: 106 inch-pounds (12 Nm)

It is important to note that when tightening the bolts, you should follow a specific tightening sequence to ensure that the camshaft cap is evenly and securely fastened. It is also recommended to use a calibrated torque wrench to achieve the correct torque specifications.

read the manual,
no country told at all
below is N.America only see, is this clear ?



https://eautorepair.net/Marketing/Default.asp

1. Hand start all the camshaft bearing cap bolts.
2. Tighten the camshaft bearing cap bolts in sequence to 10 Nm (89 lb in).
3. Loosen the center intake camshaft bearing cap bolts 1, 2 and the center exhaust camshaft bearing cap bolts 3, 4.
4. Retighten the center camshaft bearing cap bolts 1, 2, 3, 4 to 10 Nm (89 lb in).

Chery Tiggo 2.0 liter engine.
cylinder head torque sequence: 7 6 2 4 9 .......................................... 10 3 1 5 8
Is's done in 3 stages 1st stage 45 Nm......
2nd stage 90 degree turn, or a 1/4 turn......
3rd stage 90 degree turn, or a 1/4 turn.......

Camshaft bolts inlet and exhaust share the same torque settings 120 Nm

Cylinder head bolts MUST be replaced.

Main bearing cap Bolts: 1st 45Nm.......
2nd 180 degree turn, or 1/2 turn.......
Connecting Rod Bolts 1st 25Nm......
2nd 90 degree turn or 1/4 turn

Lower cylinder Block bolts 23 Nm........
Camshaft bearing cap bolts: 11Nm

Head bolts are torqued in 3 steps, 1-18ft.lbs, 2-60 degrees, 3-60 degrees, camshaft caps-10-11 ftlbs, intake manifold-12-17ftlbs, exh manifolds-32-40 ftlbs, camshaft pulley-74-89 ftlbs.

Camshaft Bearing Cap Bolt 124 ft.lb. of torque

camshafts do not have a torque setting

camshaft towers do if that is what you mean

CAMSHAFT BEARING CAPS TORQUE TO 125 INCH POUNDS. CAMSHAFT SPROCKETS - 44 FT LBS. YOU NEED A REPAIR MANUAL LIKE A CHILTON WITH CAMSHAFT TORQUE SEQUENCE DIAGRAM. YOU HAVE 20 CAMSHAFT CAP BOLTS THAT HAVE TO BE TORQUE IN SEQUENCE.

camshaft journal torque settings are 16nm