How to fix a 2010 gmc yukon folding mirror - 2005 GMC Yukon

Question edited for clarity.

This is a job for an auto-electrician unless you can read wiring diagrams.

Yukon
https://www.google.com/search?q=1994+GMC+Yukon+power+mirror+wiring+diagram

Sierra
https://www.google.com/search?q=2000+gmc+sierra+power+mirror+wiring+diagram

..

the cable that controls the mirror is more than likely broken or if it's gear driven the gear is stripped or broke. I would first try to take the switch apart and clean it

{: ) Have someone control the power fold buttons, while you check closely the passenger mirror. If you can feel or hear even a faint hum of the motor while commanded, try giving it a little help, but don't force it if you think it doesn't have enough power to extend or retract itself. The motor could be really stuck or inoperative.
Sometimes when the mirror has been accidentally or manually folded, it needs to be reset by just pressing on the fold buttons a few rounds and let the mirrors fold by itself. Like an exercise.
If you hear the humming noise whenever the fold buttons are pressed, we can assume that the circuit on that side is ok since it is responding electrically, and that a jammed or stuck mechanism is preventing it to move.
If you don't feel or hear any humming, as in totally no sign of response, then there will be additional considerations before deciding to go for a replacement mirror. You will need to confirm if the fault is on the wirings, a door module, or the mirror motor itself. A scan tool test may be recommended for effective diagnosis.
The power fold mirror can be serviced as an assembly. So, goodluck.

hi, i wanna ask its stuck with new mirror ?
Bandar Bola Terpercaya Bandar Bola Terpercaya Agen Taruhan Bola Online Situs Judi Casino

salvage yard would be the best bet

check for broken wires in rubber wire protector between body and drivers door

2003 GMC Yukon - My power mirrors stopped working.... all fuses have been checked and they are all good. Any ideas? These are the power folding mirrors. The function that allows you to fold them in for car washes etc still works.... they just will not adjust when you change drivers, or when you try to adjust them with the controls. Any ideas would be appreciated!

how do i fix the ball joints in the front end of a ford 94 aorstar

The small triangular shaped plastic panels that are on the inside of the window where the mirror is on the outside (closest to the front window) pop off and there are fasteners there.