Question about 2004 Chevrolet Silverado 2500 Crew Cab

Open Question

Picture of dip tube placement of a chevy 6.0 engine

Posted by Anonymous on


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the location of the temperature sending unit on a 2005 chevy uplander, how about a picture?

Check on you tube with vehicle type and engine size. You will probably get more detailed information and placement.

Feb 03, 2018 | 2005 Chevrolet Uplander

1 Answer

2004 dodge Durango oil dipstick is broken, need to know where in engine it is located?

I don't know litre size of engine? On the small v8 and 6 cylinder, should be close to firewall. Found this picture in your owners manual. If you can't find dip stick tube from the top, you may have to look underneath.


Oct 30, 2016 | 2004 Dodge Durango

1 Answer

Location nd placement of coil pack spark plugs nd wires in a 2002 chevy impala LS 3.8L V6 nd firing order

Google it. Links won't post but there is tons of info on that engine. Users 3 packs that sit beside each other. Firing order 1 6 5 4 3 2
coils are from front to back 1 4 5 2 3 6

Oct 30, 2016 | Cars & Trucks

1 Answer

I have a 1985 Chevy 350 with an ac delco hei distributor and i have the plug wires crossed up somewhere. I need a diagram to show the correct plug wire placement please. Thanks

This should do it.
You can also do an internet search for a standard 350 Chevy engine.
The firing order is 1-8-4-3-6-5-7-2
The order is the same for engines from the mid 1990s back to the late 1970s.


Jan 16, 2013 | Cars & Trucks

1 Answer

2004 chevy cavalier need to know how & where to

if you have the 2.2 2.3 2.4 engines oil dip stick location on passenger side front engine down below upper radiator hose below the throttle body resonator.

Nov 24, 2012 | Cars & Trucks

1 Answer

I'm a little unsure where to fill the transmission fluid.

check fluid when hot, engine running in park, if low add a little at a time through the dipstick tube. yyou'll need to dip, clean,dip several times to get excess fluid still going down tube out of the picture.

Apr 01, 2011 | 1992 Dodge Grand Caravan

2 Answers

How do you remove broken oil dipstick from a 1999 ford escort?

The dip stick tube is pressed into the engine block. Put a bolt into the top of the tube so that the body of the bolt goes into the tube and the bolt head rests on the tube (so it does not fall down the tube). Use a wrench (such as a Vise grip) to hold onto the tube at the bolt and gently work it back and forth, being sure not to deform the tube. Remove the tube and old dip stick. Replace the tube by forcing it back into the eng. block. Replace the dip stick - done :)! Some dip stick tubes have a gasket at the engine - others just **** up to a shoulder that is built into the tube. Let me know if this works. Thanks.

Dec 19, 2010 | 1999 Ford Escort

1 Answer

Wanting to know where to add the transmission fluid to a 2003 Chevy Cavalier Automatic

Automatic transmission fluid is added at the dipstick tube. Remove dipstick from tube, wipe and reinsert while engine hot and running at idle, park or nutral ok. Add 1/4 quart at a time in same tube untill fluid level is at full mark. Do not mistake engine oil dip stick for transmission stick.

May 14, 2010 | Cars & Trucks

1 Answer

The manual shows the tube and dip in front of coil it is not there .rather placement is behind it red cap says trans fluid but no stick

It doesn't have a stick. There is a plug near the passenger side cv shaft. Remove the plug when the engine is running and fill the trans until fluid runs from the plug hole.

Apr 12, 2010 | 1999 Daewoo Leganza

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

john h

Level 3 Expert

23504 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides