Programming a personal entry code
The factory set code cannot be reprogrammed but you can create your own
5 digit personal entry code. When pressing the controls on the keypad,
press the middle of the controls to ensure a good activation.
Up to three personal entry codes may be programmed to the vehicle. To
create your own personal entry code:
- 1. Enter the factory set code.
- 2. Within five seconds press the 1-2 on the keypad.
- 3. Enter your personal 5-digit code. Each number must be
entered within five seconds of each other.
- 4. Press 1-2, 3-4 or 5-6 to indicate which of the three
personal entry code positions you wish to use.
- 5. The doors will again lock then unlock to confirm that your
personal key code has been programmed to the module.
Tips:
- Do not set a code that uses five of the same number.
- Do not use five numbers in sequential order.
- The factory set code will work even if you have set your own
personal code.
- If you program a code to a position that already contains a
set code, the previously-set code will be erased.
Erasing personal code
- 1. Enter the factory set 5 digit code.
- 2. Within five seconds, press the 1-2 on the keypad and
release.
- 3. Press and hold the 1- 2 for two seconds. This must be done
within five seconds of completing Step 2.
All personal codes are now erased and only the factory set 5 digit code
will work.
Good luck (remember commend and rated this).
×