Question about 2006 Ford Escape
I need to replace the front hub bearing on the drivers side. This is AWD
Posted by Anonymous on
Rather than just the bearing, I suggest a new half shaft as the bearings and ABS tone wheel are already assembled. These Escapes are notorious for cracking the tone wheel setting off a code and then disabling the AWD system. So for a very few dollars more than it would take to disassemble the shaft , install bearings and tone wheel just get a new one.
Posted on Jun 09, 2014
SOURCE: wheel bearing
u have to take the hub off. and press the wheel bearing out. it takes alittle time to do bc u have to take your rotor and brake assembly off to get to the hub.
Posted on Jun 25, 2008
If they are sealed bearings, you will need a press to get them out. If they are bolt in, just remove the brake pads/rotors, then the axle nut, then the bolts holding the wheel bearing in. Install in reverse order.
Posted on Mar 07, 2009
It sounds like it is a front end suspension problem. The following should be checked: upper and lower ball joints, the sway bars links, and even the shocks. Replace what is problematic, and your front-end noise should disappear, if it is a front suspension problem. Hopefully, this will FixYa problem!
Posted on Oct 10, 2010
Tips for a great answer:
May 16, 2017 | Ford Cars & Trucks
Jan 12, 2013 | 2006 Ford Escape Hybrid
Sep 17, 2011 | 2003 Ford Escape
May 07, 2011 | 2006 Buick Rendezvous
Dec 30, 2010 | 2006 Ford Escape
Feb 09, 2010 | 2006 Chevrolet Silverado 1500 2WD
Nov 10, 2009 | 2004 Ford Escape
514 people viewed this question
Usually answered in minutes!