Question about 1997 Hyundai Elantra
Posted by Anonymous on
The PCV valve is located on top of the engine behind the intake. Little white piece with a black hose running out of it.
Please rate if I helped or solved your problem
Posted on Feb 09, 2009
SOURCE: wheel bearing
The front 'hub' bearing is 'pressed' out. You have to remove the steering knuckle from the vehicle and using a hydraulic press, replace the bearing by pressing out the old one and then pressing in the new one.
Posted on Sep 07, 2009
P2626 O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 1)
I'll sure this has to do with a faulty O2 sensor. This sensor is usually located around the header of your car, or down more on your exhaust.
Try disconnecting your battery for 30 mins, hook it back up, and start your car again. This will erase the error. See if it comes in again.
Hope this help (remember rated this post).
Posted on Mar 25, 2010
it can if you have the proper tools and a little patience its not very hard at all it may be a little snug i cant remember off hand where the starter is located on that car but its relatively an easy fix.
Posted on May 21, 2010
Tips for a great answer:
Sep 28, 2016 | Hyundai Cars & Trucks
Feb 28, 2013 | 2001 Hyundai Elantra
Jun 22, 2011 | 1997 Hyundai Elantra
Jun 07, 2011 | Hyundai Motor 2003 Elantra
Dec 29, 2010 | Hyundai Elantra Cars & Trucks
Jul 09, 2009 | 1997 Hyundai Elantra
Feb 21, 2009 | 1997 Hyundai Elantra
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: