Question about 1983 Dodge Pickup

Open Question

WHICH IS NUMBER 1 ON THE DISTRIBUTOR CAP OF A 318 DODGE

Posted by Anonymous on

Ad

5 Related Answers

dennymulford

Dennis Mulford

  • 1055 Answers

SOURCE: 86 dodge 250 v8-318 no fire at spark plug, will not start

did you change the main coil and coil wire?if so then check the ing resistor and then the computor box

Posted on Mar 20, 2009

Ad

Dennis Yachimec

  • 79 Answers

SOURCE: Need spark plug wire to distributor diagram for 2000 dodge ram

Hi
Here is a diagram.93009452.gif

Posted on Apr 09, 2009

Ad
emissionwiz

Marvin

  • 85239 Answers

SOURCE: need firing order for a 1979 dodge 318

here u go.

9317bc3.gif

Posted on Apr 19, 2009

Anonymous

  • 38 Answers

SOURCE: Firing order & diagram for distributor cap for

It is 1-8-4-3-6-5-7-2 with 1-3-5-7 on the drivers side front to back, 2-4-6-8 on the pass side and the dist turns clockwise.
I wish I still had my Chilton's manual, I would scan a picture for you.

If this helps, please rate me.
Thanks,
Matt

Posted on Sep 14, 2009

Testimonial: "Just the info I needed, THANKS VERY MUCH."

Zaraki

  • 834 Answers

SOURCE: distributor cap diagrahm for a 1992 dodge dakota

Here is a firing order diagram and note the distributor cap latch positions between terminals 1 and 2 and 5 and 4, and let me know if you need any help to understand this diagram or if you require any further assistance.


321004f.jpg

Posted on Oct 21, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I keep asking the same question for a 1971 dodge 318-1 v8 engine and get every year but what im asking


The firing order for a Dodge 318cid/5.2L is 1-8-4-3-6-5-7-2 clockwise rotation.
Cylinders are numbered like this.
Pass side 2-4-6-8 front to rear.
Driver side 1-3-5-7 front to rear.
The firing order is probably forged into the intake manifold. Number one tower on the distributor cap is the one facing the number one plug or the driver-side headlight.
Distributor rotor at Number 1 plug terminal points to front intake bolt on left side of engine.

Jul 13, 2014 | 2000 Dodge Dakota Quad Cab

1 Answer

Diagram or picture of where the spark plug wires go into the distributer on a engine number 318-1


For this you have to determine when the #1 cylinder is at TDC (Top Dead Center) - when it would be firing. Take the distributor cap off and look at the rotor - it would be pointing at the #1 spark plug wire on the distributor. The wires would be connected it order around the distributor cap starting at 1. The sequence is 1-8-4-3-6-5-7-2 in a clockwise fashion.

Jul 13, 2014 | 1983 Dodge Pickup

1 Answer

Need spark plug and distributor wire diagram for dodge ram van 1994 with 318 engine


if you have a friend to turn the engine over, little by little without starting it would help or better yet, pull the cap off the distributor leaving the rotor on, and with number one sparkplug out, cover the number one sparkplug hole with your finger but don't stick your finger in there, it'll get crushed, get your friend to bump the engine a little at a time, and when you notice a sudden whoosh of air take note of where the rotor is pointing... hello number 1, then clockwise or whichever way the rotor turns, apply the firing order... by the way it is 1,8,4,3,6,5,7,2... good luck.

Oct 10, 2013 | 1998 Dodge Ram 1500 4WD

2 Answers

I need the firing order for the wires to the distributor cap.


there are several engines--please pick yours.

V8-318 and 360 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise:
jturcotte_117.gif




V8-400 and 440 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Counterclockwise:
jturcotte_118.gif


V8-383 and 44 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Counterclockwise:
jturcotte_119.gif

Nov 08, 2010 | 1987 Dodge Ramcharger

1 Answer

What is the firing order for a 1977 Dodge 360 and 318. Can I get a picture of the firing order on the distributor?


The firing order is 1-8-4-3-6-5-7-2. I'll try to find a pic of the distributor layout although number "1" is usually embossed on the cap or on the distributor body.

Hope this helps!

Sep 16, 2010 | 1983 Dodge Pickup

2 Answers

Firing order for 1990 dodge dakota 4x4 318 cu. in.


For the 1990 Dodge Dakota 318 cubic inch = 5.2L

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
..........(back)...........
|...8...|..........|...7...|
|...6...|..........|...5...|
|...4...|..........|...3...|
|...2...|..........|...1...|
..........(front)

Distributor:
............3
....4..............6...
.......................(+)-screw: rounded-end of Cap
8......................5
(+)-screw: square end of Cap
.....1...............7
..............2
.........(front)

Rotation: Clockwise

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Jun 27, 2010 | 1990 Dodge Dakota

2 Answers

Distributor firinng order wiring diagram 1998 ram 1500 318 4x4


1-8-4-3-6-5-7-2 Clockwise rotation. #1 should be marked on the cap.

Nov 06, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Plug wire firing order on distributor cap on 1979 dodge 318


V8s are 18436572 going clockwise number 1 should be marked on cap or closest tower facing you standing at the rad

Jan 09, 2009 | 1980 Chrysler Cordoba

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,626 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...