SOURCE: firing order diagram for 1986 ford ranger
you will find this site usefull , here is the diagram for 1986 ford ranger 2wd 2.9liter v6 firing order .
http://www.autozone.com/N,26200242/shopping/specsSelect.htm
Fix Ya vote is my Reward , thanks .
SOURCE: need vacuum diagram for 4-wheel drive
the 4x4 don't use vacuum. the front is auto lock when the transfer is engauged with the button. if the light don't which when pressed into 4hi or 4low. the motor on the transfer case maybe hung up. they have to be used at least 4 times a year not to go bad. the motor is on the back side of the transfer case. best of luck.
SOURCE: 1998 ford ranger xlt 2.5
These are not very good but all I could find. The cam mark is about the 7 o'clock position. I cannot see the crankshaft marks in the side pic.
SOURCE: What is the firing order on a 92 Ford ranger xlt
The spark plug firing order is ( 1 - 4 - 2 - 5 - 3 - 6 ) The distributor rotor turns CLOCKWISE ( 1 - 4 - 2 - 5 - 3 - 6 ) The marked # 1 position on the distributor cap faces towards the firewall and slightly towards the passenger side The engine cylinders / spark plugs are numbered : passenger side of engine , front to rear , 1 , 2 , 3 and drivers side of engine , front to rear , 4 , 5 , 6
1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6
1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6 407 views
Usually answered in minutes!
×