Question about 1994 Dodge Caravan

1 Answer

Troubleshooting no spark

Replaced coil , computer, and crank sensor and still will not get no spark what else could I try

Posted by richard on


1 Answer

S and B Handyman Service

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has answered 20 questions.

  • Contributor
  • 35 Answers

What engine?

Posted on Oct 17, 2014


5 Related Answers

Richard Delahant

  • 1201 Answers

SOURCE: car has no spark or injector pulse(new ecm,crank sensor)

Check the fuse for the injectors, some vehicles have the injectors and coil running on the same circut, at the same time check the fuse for the ignition.

Posted on Jan 30, 2009


Jonah Oneal

  • 14092 Answers

SOURCE: Where is the crank sensor

look on the left side midway lower botom.

Posted on Apr 20, 2009

Christopher Keene

  • 201 Answers

SOURCE: 1992 dodge 318 engine turns over, but no start. No

if truck has a ceramic ballist resistor near and connected to coil this could be problem or the crk posistion sensor could be too, i would change ballast first if you have on your truck appx cost $10

Posted on May 09, 2009


  • 7 Answers

SOURCE: 1997 Dodge Ram 1500 5.2 liter won't start


Posted on May 26, 2009

raj somaiya

  • 5370 Answers

SOURCE: no spark from 2001 dodge neon se 2.0 i've replaced cam shaft sensor, crank sensor,coil still no spark

For no spark problem,click the link below :---Car has no spark?

Posted on Feb 13, 2012

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1999 chevy blazer will not start. No spark!?!? No spark from the coil to ground.

Could be a bad coil, bad Ignition Control Module (what controls the ignition coil as commanded by the engine computer), or a bad crank position sensor, or cam position sensor. Or the wiring and circuits to all the ignition parts.
Often it is the crank sensor (CKP sensor)-The pcm must have this information from the crank sensor to determine spark timing. If no good signal from the crank sensor, there will be no spark.

May 29, 2017 | Cars & Trucks

1 Answer

Troubleshooting engine

Yes you are heading in right right direction. Check to see if there is spark out of coil. Spark at coil means replace distributor or rotor. No spark at coil replace ignition module or crank sensor good luck. Oh yea crank sensor is cheaper i would try that first if there is spark out of coil.

Apr 18, 2014 | 2001 Ford Explorer Sport

2 Answers

Cranks but no spark

hi dean.
try this link it might help you find out why it will not start.
1997 dodge Avenger with 2 0 engine Cranks but no spark Google Search

Nov 02, 2017 | Dodge Avenger Cars & Trucks

3 Answers

5.9L Durango wont start. It's turning over and Im getting fuel (sprayed starter fluid in the intake and still nothing, and fuel comes out of the valve on the fuel rail when pressed) and I believe it's...

If you have access to an OBII scanner, while cranking you can read all the faults that computer is tracking. Scanners run about $60 but are 1 of the best tools you can own vs throwing parts at it. It's $60 well invested. It resets lights also.

Mar 09, 2011 | 1999 Dodge Durango

1 Answer

Engine has no spark and crank sensor & coils have been replaced. It has power right up to the coils but will not give spark to plugs

ECM uses input from crank sensor to generate spark signals to the coils.
If all fuses good, troubleshoot the EC relay and socket in the engine compartment fuse box.

Please see my tip at and let me know if you have questions.


Sep 21, 2010 | 2000 Hyundai Sonata

2 Answers

1996 Jeep Grand Cherokee No Start

I would be thinking that there is a good chance that you need to be checking out replacing the computer, if you aren't getting any communication with the proper scan tool then the computer isn't communicating with anything in the vehicle...... I would have guessed first off that the ignition control module might be bad but that is obviously part of the computer also, I would be looking in that direction.

Sep 19, 2009 | 1996 Jeep Grand Cherokee

2 Answers

98 dode ram wont crank no spark

May have no spark due to a bad crank sensor, which is responsible for spark when it gets a pulse through the cars' computer.

Apr 24, 2009 | Dodge Ram 1500 Cars & Trucks

1 Answer

No spark

your distributor sends trigger signal for coil, based on cam and crank position sensors test distributor output and sensors you can get info on troubleshooting from repair manual (purchase from parts store) under troubleshooting section in manual. You will need multi tester with continuity setting and dc volt setting.

Feb 04, 2009 | Ford Fairmont Cars & Trucks

Not finding what you are looking for?
1994 Dodge Caravan Logo

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides