SOURCE: 1990 Ford Ranger with vibration
you have a messed up harmonic balancer. or puller..or a broken blade on a fan.
SOURCE: how do i remove a fender from my ford ranger 2008?
there should be bolts under the hood as well as screws by the wheel wells remove these and the fender should come off rather easily
SOURCE: my front tires lean in at the top on my 1990 ford
Dear Leaning,
This is what they call a negative camber issue, caused normally by excessively worn or damaged parts.Since this is a 90 Ford Ranger this vehicle has upper and lower balljoits on both front sides.It would be best to inspect these first and make sure there is no play or excessive wear on them, after that make sure your coil springs have not become weakened.When that has become performed the last step would be to get an alignment on the vehicle.If the camber is not still quite in spec then this vehicle will require what they call camber correction slugs.....they install in the upper balljoint sleeve and are capable of being turned around so you can acheive your desired camber setting.Any questions get back to me, I HOPE I COULD HELP!!!
SOURCE: 95 FORD XLT RANGER FRONT DIFF REMOVAL
remove the shock (be careful shock mounting stud is welded to driver side axle tube and will sometimes break off) lower the axle tube (arm) bolt should come out from the top.
SOURCE: how to remove front fender on 2002 ford f250 super
take off the fender bolts and the wheel well bolts take out headlight bolts behind the headlight then it should come off
249 views
Usually answered in minutes!
×