Question about 2013 Dodge Avenger

Open Question

2013 dodge avenger wont start

The fobs weren't working now they work but it wont start

Posted by george on

Ad

5 Related Answers

DAD5bbbbg

Thomas Kessenich

  • 111 Answers

SOURCE: Turn signals wont work on 95' dodge avenger

try to replace the flasher. it is round and has either two or three prongs on it. it should be by the fuse box.

Posted on Mar 03, 2009

Ad
wyatt1582

johnny wyatt

  • 453 Answers

SOURCE: my 98 dodge avenger wont start i think its the starter pleas help

Sounds like the solenoid not grounded if you try to start and all it does is click then the solenoid is not grounded and if it's built on to the starter which it might be you might have to replace the starter. Try cleaning the wires going to the starter before you buy a new they may be corroded.

Posted on Apr 26, 2009

Ad
Nomodo4u

Poppy Chulo

  • 863 Answers

SOURCE: 1996 dodge avenger oesnt start after warms up

Go get the battery and alternator tested for free at the auto parts store.  For some reason the alternator isn't charging the battery while your driving.

Posted on Nov 18, 2009

raj somaiya

  • 5370 Answers

SOURCE: 08 avenger factory alarm

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Posted on Feb 16, 2012

wtdash

  • 605 Answers

SOURCE: Sometimes when I start my 2009 Dodge Avenger the audio controls do not work. The touch screen is working fine but the volume wont go up or down and nothing will play out of the speakers.

Sounds like the audio/stereo unit is (going) bad.Take it back to the dealer - should still be under warranty.

GL,
Td

Posted on Oct 01, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY FOB FOR 2013 CHRYSLER 200 WILL NOT OPEN THE TOP


there are no do it yourself instructions that will work to reprogram the 2011, 2012, 2013, 2014, 2015, and 2016 Chrysler 200 remote head key keyless entry remote fobs (with or without remote start button) This remote must be programmed by a Chrysler/Jeep/Dodge dealer or a pro locksmith.

Feb 09, 2018 | Chrysler Cars & Trucks

1 Answer

Dodge Avenger 2013 - Horn honks once every time I physically open the drivers door? No warnings in message center and no indicator lights on in dash- could this be a low battery in key fob?


YES - ABSOLUTELY....

Replacing the battery requires no special programming.

However
So long as you have at least two (2) programmed
keys (up to eight are supported) you are able to add
additional keys or REPROGRAM your RKE fobs
(remote keyless entry fobs) ... YOURSELF.

Check page 19 of your OWNERS MANUAL
( 519 pages: OR CLICK HERE )
Dodge Avenger 2013 Owner Manual Replacement Keys

Hope this helps


Carnac the Magnificent

Jan 03, 2018 | Dodge Cars & Trucks

1 Answer

Went to use the key fob for a 2013 dodge ram today. Truck would not recognize it.


changing batteries is never a bad idea and it only take a minute or 2 to reprogram you fob remeber you can only have 2 program at a time so if there are 3 one will not work

May 02, 2017 | Dodge Cars & Trucks

1 Answer

My 2010 Dodge Avenger the blower was only working on the to low and medium prop mob up with penny work for a while to penny fell out won't work now


2009 dodge avenger blower motor works on low, medium ...

www.fixya.com/.../t21143783-2009_dodge_avenger_blower_motor_wo...
Nov 2, 2013 - 2009 dodge avenger blower motor works on low, medium low,medium high but not high. Resister has ... SOURCE: Dodge 2001 Stratus - A/C fanonly blows on High ... working. Jan 04, 2010 ' 2003 Dodge Durango · 1 Answer ...

Oct 29, 2015 | Dodge Cars & Trucks

1 Answer

How to reset the check engine light on 2013 dodge avenger without a obd2


if theres used to work with older trucks not sure now , you can disconnect the truck battery for 24 hrs before you reconnect the battery.

Jun 19, 2015 | 2013 Dodge Avenger

1 Answer

How to reset the check engine light on 2013 dodge avenger


Use scan tool to erase codes, or have parts store do this.

Jun 19, 2015 | 2013 Dodge Avenger

1 Answer

How do I reset factory oem remote car starter dodge avenger 2011?


What do you mean by "reset", do you want to add an additional key fob, or is the system not working ?

Nov 21, 2014 | 2011 Dodge Avenger

1 Answer

HORN WONT WORK ON MY 08 DODGE ADVENGER


see if it works using the key fob if so the relay and the horn work so look at the switch on the steering wheel

Aug 22, 2012 | 2008 Dodge Avenger

Not finding what you are looking for?
2013 Dodge Avenger Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...