1999 Peugeot 206 Logo
A
Anonymous Posted on May 30, 2014

206 peugeot total distance recorder not working

1 Answer

amjad ajamia

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 19 Answers
  • Posted on Jun 01, 2014
amjad ajamia
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Sep 28, 2011
Answers
19
Questions
0
Helped
17322
Points
31

In this model, the gearbox should be fitted with speed sensor, as it provides the info of vehicle speed to the instrument panel(dashboard) by means of speedometer and the total distance covered. So, does the speedometer work proberly, does the needle move correctly? If yes, you have to change the instrument panel. if the answer is no, then the speed sensor is not working, either the sensor itself or one of its wires is broken. Notice that this sensor is a hall-effect type, which means that there are 3 pins on the sensor , 1st is 12V supply, 2nd is 0V (earth) 3rd is a signal wire that transfers signal to the points I mentioned above.
goooooood luuuuuuuuuuuck

5 Related Answers

ginko

Ginko

  • 19396 Answers
  • Posted on Mar 28, 2009

SOURCE: fuse box diagram peugeot 206

Check the website below:

Peugeot 206 Fuses.

Ad

Marko

  • 127 Answers
  • Posted on Sep 26, 2009

SOURCE: Torque setting for peugeot 206

hallo
If you have normal 1.6 liter 206:
max bolt lenght:176,5mm
20Nm and aditional 240°

1,6 liter 16valve engine
max bolt lenght:122,6mm
20Nm and aditional 260°

Marko

mike hayward

  • 279 Answers
  • Posted on Dec 08, 2009

SOURCE: how to turn off the airbag on peugeot 206 1.6

there should be a key switch inside the car somewhere you need to turn it to the off position with the ignition key
(it will probably be some where on the dash, in the glove box or center console)

Anonymous

  • 1 Answer
  • Posted on Dec 28, 2009

SOURCE: peugeot 206 cc fan belt change

hi ive a peugeot 206cc 02 reg, the STOP light keeps flashing ive checked the normal oil and water but alls ok so whats the problem still runs fine and temp stays where it should??? any tips??

Anonymous

  • 4102 Answers
  • Posted on Jan 15, 2010

SOURCE: my peugeot 206 all 3 of my back brake lights are not working

hi the first thing you need to check is the fuse in the fuse box if this is ok then the chances are the brake light switch needs replacing or it may have come loos what you need to do is get down on your knees so you can get a close look at the brake pedal then if you follow the brake pedal all the way to the top just before it goes through the bulk head into the engine you will then see a switch attatched to the very top of the brake pedal it will have 2 or 3 wires coming from it so check if this is fitted correctly also you could remove it and press the switch by hand and then see if the brake lights work that way.

If they do then try fitting it again and you may be able to adjust it slightly so check this if on the other hand it still dont work then you need to get it replaced.

Let me know how you get on or if you need further assistance ok

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the main fuse of peugeot 206

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few reliable-store .. let me know if u need help
thanks
0helpful
1answer
0helpful
2answers

I have a peugeot 206 cc and the boot sensor says boot is open when it is closed

central locking isnot working because the boot cant lock change the boot sensor wswitch then central locking will work all good
0helpful
1answer

What size is the fan belt for my Peugeot 206 v reg as i have a 1453 size

Hi there, I just googled this info. There seems to be a choice. Have a look.
www.doctorcarparts.co.uk/peugeot-206-62002-ctg_2.htmCached
2helpful
1answer

Torque setting for peugeot 206

hallo
If you have normal 1.6 liter 206:
max bolt lenght:176,5mm
20Nm and aditional 240°

1,6 liter 16valve engine
max bolt lenght:122,6mm
20Nm and aditional 260°

Marko
3helpful
2answers

Peugeot 206 cc fan belt change

hi ive a peugeot 206cc 02 reg, the STOP light keeps flashing ive checked the normal oil and water but alls ok so whats the problem still runs fine and temp stays where it should??? any tips??
40helpful
2answers
Not finding what you are looking for?

383 views

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...