I have a 06 Seat Ibiza 1.2 petrol (3 cyl). It is now in limp mode, the following OBD faults are showing, P034 cam sensor, P1116 HO2 sensor & P1544. These problems came about suddenly. I have had t
I have a 06 Seat Ibiza 1.2 petrol (3 cyl). It is now in limp mode, the following OBD faults are showing, P034 cam sensor, P1116 HO2 sensor, & P1544 throttle position sensor. These problems came about suddenly. I have had the cam sensor replaced but all faults still show. Anyone any ideas how to sort this problem ?.
Testimonial: "Bank Holiday weekend now, it will be Tues before I can get to main dealer. thanks for your help."
Add Your Answer
Tips for a great answer:
- Answer the question.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
run fault codes to check for problems . If there is nothing then you may have to have a lap top computer connected and an expert reprogram the ECM cpu to reset the settings for the engine tuning parameters.. It has to be done in the ECM program and best done on a chassis dyno so that the settings can be tested immediately and adjusted if necessary.
hi had simular problem with my x300, when hot almost went into limp mode, replaced the cam shaft sensor, worked fine then went lumpy again the arm holding the sensor had cracked and was the cause of my porbem may be an idea to check here, hope this helped.. roy2k51