We just bought a 2006 nissan maxima should the

Could be Child safety lock help prevent the rear doors from being opened accidentally. The child safety lock levers are located on the edge of the rear doors.

Fuse beside battery terminals check called a fuseable link

HOW TO: 2000-2006 Nissan O/D (Transmission) Diagnostic ...

? 3:00
www.youtube.com/watch?v=BqyUIN1EWvI
Nov 14, 2011 - Uploaded by NJ LIFE-HACKER Hey man I got a 2000 maxima when I first turn the key on or start the .... 2004 nissan sentra 1.8 automatic transmission i did the diagnostic like in video and same results as you tranny is good. But the reverse gear does not work and i have lost power. .....2000 maxima/i30 transmission solenoid no 3rd&4th!

No reverse gear, please help - Nissan Forum

I would check the brake switch & the shift solenoid, if that
applies, that releases the shifter

A wiring diagram is a must, unless your just testing the solenoid

Also there may be some adjustment for the shift linkage

Without the factory manuals & they are on a CD, your at a big
disadvantage,guessing at something you don't know about

Sure need but want to avoid the prices at a dealer

• No, there is no way to make it so all the doors open with the single push of a button on the FOB. This is how FOB's are set up. First push = drivers door, Second push = all doors and on SUV's Third push = back door latch. Perhaps the dealer for an outrageous price can hook their software up and program things to work like that but guaranteed their is no way to do this at home, sorry.

• If you have any comments please feel free to leave them here.
• Hope this helps and thank you for using FixYa.

Regards, Tony

yes its not reconicng the key needs reprogramed

Take your car in to a dealership. They will remove the door panel, replace the lock, and put everything back together the way it was before. They will also check to be sure this fixed it.

there is too much free play on your clutch pedal,this can be adjusted,or there is air lock in the piston for the clutch pedal,take the air out

this is how most nissans program the key fobs.
get in the car and manually lock the drivers door with the door switch.
put the key in and out of the ignition about 10 or 12 times until the hazard lights flash once.
turn the key to the ignition setting so all the dash lights are on,but do not start the car.
click the lock button on the remote fob.the hazards should flash once to confirm.
turn off ignition and remove the key.
unlock the drivers door and open the door.
the remote should now work.
if that does not work,the dealer can reprogram the fob with the obd diagnostic system.