How to repair abs brakes on a pajero gls 2006

Hi, if it is a series III model V60/V70 then the original size is 265/70x16inch, alternative is 235/70x16 inch for winter tyres.
The series IV models from 2007 onwards have larger front brake calipers and need a 17" rim at least (series equipment is 18" rims)
BR Winfried (Austria)
until now 3.2DI-D Pajero GLS LWB Model 2001
now 3.2DI-D Pajero LWB model 2009

problem usually narrows down to abs system problem or hub failing causing problem with abs --have vehicle scanned for the trouble code it will assist you as where to start in repairing problem most auto stores offer this service for free --in the mean time pull the abs fuse so brakes can revert to a normal non abs system till repairs can be made

if the abs light is still on after changing the parts
then yes need to clear the lights with code reader.

some time if the car left with battery disconnected for 30 mins
it some time resets the computer and clear the fault

Hi Javier, Im AL the owner of Big As Auto Repair

Javier, ABS Module is located under the hood. It mounts to the side of the hydraulic brake system. Hope this helps and please visit my auto-repair website and check out the satisfied customers and give me a shout while your there. http://www.bigasautorepair.com/

Pull the fuses for ABS

loss of vacuum boost to the system or the motor fuse is blown..

how can over come this problem?

What is the 55HBB fault code?
Any help me.

If it has ABS brakes then yes it requires a special tool to bleed the ABS control valve.

I have a 1999 mitsubushi pajero GDI 3.5. The ABS and brake lights went on while at a trafic sign. l then lost the brakes after about 100m. l tried switching the car on and off but the lights still appear and no brakes. Please help.