Question about 1988 Chevrolet S-10

2 Answers

1999 chevy blazer fuse box diagram

Change the one burnt out rear light, but still neither rt or lt rear brake light work. But the top brake light still works. Was told it may be the fuse or turn signal switch. Im a busy grandmother and pretty up on fixes, so Im HOPING it is just the fuse. Having issues figuring out which fuse it could be. THANKS in advance for your help!

Posted by Anonymous on

Ad

2 Answers

josue eduardo

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

It sounds like the circuit board of the tail light
1999 chevy blazer fuse box diagram - 10_29_2017_11_36_34_pm.png

Posted on Oct 29, 2017

Ad

George Scott

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 789 Answers

1999 chevy blazer fuse box diagram - image-yr2xq3xjw3t4nirunk4zaq4t-5-0.jpg

Posted on Oct 29, 2017

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: brake light on 2001 chevy blazer LT 2wd

When my blazer did this they had to replace part of the wiring harness in the steering wheel. It took forever for them to get the parts because we live in nowhereville, but once it was in it works again and no problems. I had to take it to the actual chevy dealer because none of the other places had a clue. good luck.

Posted on Jul 31, 2008

Anonymous

  • 2 Answers

SOURCE: Brake lights wont work! All others do!

I just had the same problem on my '04 Silverado. All it was was corrosion in the socket/bulb. Put some dialectic grease on both the bulbs and worked them in and out a couple of times and now they work fine. Was weird that they both went out suddenly and together but I guess they are made exactly the same.

Posted on May 14, 2009

Anonymous

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

scrap_it

  • 87 Answers

SOURCE: having trouble with brake lights and turn signals

could be a few reasons...first check trailer wireing harrness..if none or ok then replace the curcit board in the tail lights

Posted on Mar 06, 2010

Anonymous

  • 288 Answers

SOURCE: I have 1999 Blazer with

THE BRAKE LIGHTS DO GO THROUGH THE TURN SIGNAL SWITCH. TO TEST, REMOVE THE PLASTIC COVER AROUND THE THE COLUMN, UNDER THE STEERING WHEEL. THE TURN SIGNAL SWITCH MUST BE IN THE OFF POSITION. YOU WILL NEED TO EXPOSE THE WIRES UNDER THE STEERING WHEEL. DO NOT DISTURB THE WIRES IN THE YELLOW JACKET. THEY ARE AIRBAG WIRES. YELLOW PLUGS YELLOW JACKETED WIRES ARE AIRBAG.THE WIRE IN QUESTION HERE IS YELLOW BUT IT IS NOT IN A YELLOW JACKET, [ SLEEVE ]. NOW, PUSH ON THE BRAKE PEDAL. THE YELLOW WIRE IS LEFT REAR TURN & BRAKE WIRE, DARK GREEN IS RIGHT REAR TURN & BRAKE WIRE. BRAKE PEDAL DEPRESSED, IF BOTH OF THOSE WIRES HAVE POWER, ALL OF THAT IS OK. IF THE YELLOW WIRE HAS NO POWER TURN SIGNAL SWITCH IS BAD

Posted on Jan 16, 2011

Testimonial: "Great information, very complete. Thanks!"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How long can a break line be broking before you have no brakes


You have what is called a diagonal brake system. What that is, you have two brake systems on one brake pedal. One system controls the lt. front and rt rear and the other controls the rt. front and lt. rear. If a line line breaks that system stops working. This system was set up to cause uniform braking. With a line broke you are only stopping on two wheels. If you get into a panic situation you will not stop in time and could suffer great loss. GET THAT LINE FIXED NOW.

Mar 01, 2013 | Chevrolet S 10 Cars & Trucks

1 Answer

Rear brake line was removed and now i need to bleed the system 1997 chevy blazer any special tools needed ?


you need a 1/4 or 5/16" wrench and procedure requires bleeding all corners staring with furthest away from master cylinder working your way closer (Rt Rr, Lt Rr, Rt Frt, Lt Frt)

Mar 02, 2011 | 1997 Chevrolet Blazer

4 Answers

Fast blinker and brake lights out


it sounds like you have a bad fuse or your lights are burnt out

Sep 05, 2009 | 2001 Ford Focus

1 Answer

Radio fuse


# 18 for radio and it is a 20amp...see below for all #'s got to and amps... 1-20amp-pwr outlet frt. 2-10amp-rear fog lights(export only)
3-15 amp-horn 4-10amp-hedlt low beam rt
5-10amp-hedlt low beam lft 6-20amp-bodycontrolmodule/pwr dr locks 7-spare 8-spare 9-10amp- rt pk lt /rt tail lt/trailer tow lt/cluster
10-spare 11-15 amp-flasher 12-15 amp-stop lts
13-10amp-bodycontrolmodule/cmtc/cluster 14-spare
15-10amp-pdc fuel pmp & auto shutdownrelays/skis
16-20amp-pwr outlet rear 17-15amp-rear wiper 18-20amp-radio choke relay 19-20amp-frt fog lts/trailer tow stop and turn lts
20-20amp-sunroof 21-spare 22-10amp-wiperswitch/frt and rear washer 23-10amp-lft park lt/lft tail lt 24-10amp-pdc blower motor relay 25-10amp-heatseatswitch/hvac controlhead/trailor tow battery charge 26-10amp-hedlt highbeam rt 27-10amp-hedlt highbeam lft
28-spare 29-15amp-heated seat module 30-10amp-heated mirrors/rearwindowdefrosterindicator 31-20amp-cigarlighter
32-10amp-radio/frtdoorlockswitches/bodycontrolmodule
33-10amp-skis/diagnostic connector 34-15amp-cluster/courtesy lts/radio/bodycontrolmodule/maplights/cmtc/underhood lt/vanity lts
35-spare 36-10amp-ignition run/start-orc/lft and rt siacm
37-10amp-ignition run only-orc 38-10amp-abs module/brake shift interlock solenoid 39-10amp-rear window defroster relay/flasher/backup lts

Jul 29, 2009 | 2002 Jeep Liberty

1 Answer

1997 mustang rear running lights dont work front


assuming you have brake lights and marker light, I would check the socket for voltage, both the contacts and probe the wire (Brown) for voltage...it could be a bad socket.... if no voltage, trace the "Bwn" wire back and keep probing til you find voltage, check the connector in the trunk on the LT/RT side also...hope this helps you...GL

Jul 08, 2009 | 1996 Ford Mustang

6 Answers

2002 jeep liberty interior fuse diagram


1-20amp-pwr outlet frt. 2-10amp-rear fog lights(export only)
3-15 amp-horn 4-10amp-hedlt low beam rt
5-10amp-hedlt low beam lft 6-20amp-bodycontrolmodule/pwr dr locks 7-spare 8-spare 9-10amp- rt pk lt /rt tail lt/trailer tow lt/cluster
10-spare 11-15 amp-flasher 12-15 amp-stop lts
13-10amp-bodycontrolmodule/cmtc/cluster 14-spare
15-10amp-pdc fuel pmp & auto shutdownrelays/skis
16-20amp-pwr outlet rear 17-15amp-rear wiper 18-20amp-radio choke relay 19-20amp-frt fog lts/trailer tow stop and turn lts
20-20amp-sunroof 21-spare 22-10amp-wiperswitch/frt and rear washer 23-10amp-lft park lt/lft tail lt 24-10amp-pdc blower motor relay 25-10amp-heatseatswitch/hvac controlhead/trailor tow battery charge 26-10amp-hedlt highbeam rt 27-10amp-hedlt highbeam lft
28-spare 29-15amp-heated seat module 30-10amp-heated mirrors/rearwindowdefrosterindicator 31-20amp-cigarlighter
32-10amp-radio/frtdoorlockswitches/bodycontrolmodule
33-10amp-skis/diagnostic connector 34-15amp-cluster/courtesy lts/radio/bodycontrolmodule/maplights/cmtc/underhood lt/vanity lts
35-spare 36-10amp-ignition run/start-orc/lft and rt siacm
37-10amp-ignition run only-orc 38-10amp-abs module/brake shift interlock solenoid 39-10amp-rear window defroster relay/flasher/backup lts

Jul 03, 2009 | 2002 Jeep Liberty

1 Answer

Rear brake lights


they may be dual element bulbs. the element used for the tail lights is ok but the brake light element is burnt. change both bulbs.

Jun 24, 2009 | 1989 Nissan Stanza

2 Answers

I don't have an owners manual and I need a fuse diagram for my 2002 jeep liberty


There is normally a diagram printed onto the the inside of the fuse case.

May 24, 2009 | 2002 Jeep Liberty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...