I have a 2000 Mercury Sable LS Sedan with a 24V 3.0L Duratech engine. My AC Compressor went out and I need to know please if there is a bypass serpentine belt and what size it would need to be. I am aware of the dummy pulley, it is not what I need though. Is it possible to put a shorter belt on this engine? Thanks :)
I had to do the same thing on my Toyota Avalon. I used a flexible cloth measuring tape to measure around the pulleys (minus the A/C, of course). I had to cut the pulley off the Avalon A/C compressor because of interference issues. You may or may not have to do the same.
SOURCE: need to bypass ac compressor on a1997 chevy lumina 3.1l
I doubt anyone knows that off the top of their head. You could run a string through the path you want the belt to take and measure how much string it takes. This will give you an approximate length for the belt -- most parts stores could find one close to that size.
SOURCE: how to put serpentine belt on Mercury Sable
its easy just follow the diagram and find the tension pulley and adjust it just enouf to get the belt on then release. for futher help please call 419 689 1114
SOURCE: I currently own a V6
Talk to your automotive supply. My understanding is that a Non-AC belt will run right thru the area where the AC pulley is. You can get a bypass pulley that will allow you to avoid the AC and it's pulley and a specific belt for that setup.
3,288 views
Usually answered in minutes!
As Thew saying goes Don,t Touch It If It,s Workin Ok Or Ya Will Be In Big TROUBLES OK
×