Question about 2008 Dodge Grand Caravan

1 Answer

How do I access engineer menu on 2013 dodge ram 5500?

The screen is stuck on dodge symbol and below it says cm radio I have unhooked batteries for hours with no change.

Posted by Douglas Ratigan on


1 Answer

Scott Corey

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has answered 20 questions.

  • Expert
  • 64 Answers

Try unhooking batt touch ends of cables together this will discharge capacitor (vehicles back up power supply) i've done this on a number of vehicles and had it work

Posted on May 22, 2014


3 Related Answers


  • 1 Answer

SOURCE: time clock change on dodge ram navigation radio

Press "NAV" to go to the main navigation menu.

Scroll down and select "System Settings"

Scroll down and select "Clock Setting"

Make sure "Show GPS Clock" is selected with a red check in the box.

I had to switch "Daylight Savings" from "ON" to "OFF" in order to bring the time back an hour. I assume that I'll just have to switch it back to "ON" in the Spring in order to move the time forward and hour.

Posted on Jan 28, 2009


Gummy D Milo

  • 265 Answers

SOURCE: the engine symbol on the left side just came on, what can that be

Go to Autozone for a free code read and print out

Posted on Feb 24, 2010


  • 431 Answers


I have seen this many times it most of the time was caused by a leak in the intake or air plenum ,you can test for that using a water bottle with a mist spray around the intake should change RPM.'s as it draws the water in ,telling you the area that is leaking BE CARFULL. MOVEING parts hope this is helpful. let us know how we are doing Thank You.

Posted on Mar 23, 2010

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What do I do about the defective radio in my 2013 Ram 2500. Blank screen and no controls.

Pull the radio out and have it repaired. Make sure it has power first.

Jun 15, 2017 | Dodge Ram 2500 Cars & Trucks

2 Answers

Reset radio in 2013 RAM 2500

it may take a day for it to revert back to displaying the ram logo when powered up.

Jul 27, 2016 | 2013 RAM 2500

1 Answer

My shifter is stuck in 4 and won't change- how do I fix?

It sounds like you have a bad or sticking solenoid that will have to be replaced inside transmission.
you can clear code by unhooking battery 5 min., but this method you could loose info like, radio settings, anti theft, etc.
press the helpful button

Jan 20, 2016 | 2009 Dodge Ram Pickup 1500

1 Answer

What is causing my starter to engage while the motor is running and won't quit until you unhook the battery?

Ouch! Sounds like the Bendix on the starter motor could have been damaged, or possibly the starter relay. I'd check the relay first. With ignition and engine off. pull the small terminal on the relay terminal Labeled "S" for start. It is next to the Battery terminal. (See enlarged pix on the link below.) Next, try to start the engine. It should not even try. Then, reconnect the starter wire to the relay. Have a friend start the engine and then pull the wire from the "S" terminal. If pulling the wire kills he engine, the you probably have a bad ignition switch. If the starter motor is still engaged with engine running, then I'd suspect a stuck relay or stuck Bendix. Since the relay is the cheaper component of the two (10 to 25 bucks), I'd change the relay. If the relay doesn't remedy the situation, It's time to replace the starter/Bandix.

Search from over 10 Million Auto Parts

Apr 05, 2015 | 1984 Ford Bronco II

1 Answer

I have a 2013 dodge ram with a uconnect 5.0. It locked up, all I get is the ram symbol, how do I reset the stereo?

There is no way to reset a radio in this condition. Take it to the dealer. There is a flash update that can be attempted but more than likely you need a new radio. I'm guessing you have a RA3 or RA4 radio. There is a known issue with 2013 MY radios.

Mar 14, 2015 | Dodge Ram Cars & Trucks

1 Answer

How to set radio clock in 2013 Dodge RAM

follow this link to download a owners manual for your vehicle , page 300 give the radio clock setting procedure
My Ram Trucks Ram Owners Service Manuals Ram Cars Minivans SUVs

Sep 27, 2014 | Cars & Trucks

1 Answer

The engine symbol on the left side just came on, what can that be

Go to Autozone for a free code read and print out

Feb 24, 2010 | 2002 Dodge Ram Maxi

2 Answers

1999 dodge ram 1500 2wd 5.2L gives different intermittent codes

pcm posably but i think i would look at the grounds from the battery to body and bat to engine

Jan 23, 2010 | 1999 Dodge Ram

1 Answer

Just changed the battery on my skoda fabia vrs

The easiest way to reset the computer coding system is to unhook your battery and let it sit for 3-5 minutes. If the code comes back on after starting your car then whatever is causing the code is still happening.

Beware that you will most likely need to know the code to unlock your radio if it has the theft protection built in where if power is unhooked from the radio the radio is locked until you follow the procedure outlined in your owners manual with a code to get it back working. If you don't have the code, your Volkswagen dealer can help you out as well.

Dec 15, 2009 | 2001 Volkswagen Golf

Not finding what you are looking for?
2008 Dodge Grand Caravan Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides