Big end bearing settings E90 BMW

https://www.hyundaiaftermarket.org/forum/engine-intake-exhaust-11/hundai-i10-big-end-main-bearing-torque-specs-80245 https://www.hyundaiaftermarket.org/forum/engine-intake-exhaust-11/hundai-i10-big-end-main-bearing-torque-specs-80245

A cheap shop manual will have this and much more. If you are in this deep you probably need one.

2007 bmw e90

will this fiat uno 1100 repair manual help
engine torque settings page 17 of this 303 page pdf
big end 41 nm or 30 ft lb
http://www.avtoitalia.ru/katalog/Haynes-Fiat_Uno_manual.pdf

You are looking for the torque settings for big end bearings and main bearings on a daewoo matiz?
Main bearings torques on a Daewoo Matiz 800cc (1999)
Stage 1: 25-30 Nm
Stage 2: 55-60 Nm
Big End Bearings…

Toyota Yaris Main and Big end Torques:
Tighten the main and big end bolts in sequential order and in steps two steps.
- Main bearings. Stage 1. 30 Nm.
Stage 2. 59 Nm.
- Big end bearings. Stage 1. 15 Nm.
Rotate further by 90 degrees.

What sort of engine they are all different!

v6 have 4 main bearing sets and 6 big end bearing sets
v8 have 5 main bearing sets and 8 bigend sets
5 cylinder inline will have 6 main bearing sets and 5 big end set
It appears that some where you are short a set of bearings Check that the rebuild kit is for your engine

hi for main bearings it is stage 1 : 25nm leave for 10 mins then stage 2 its turn 53 degrees for big end bearings it is stage 1 : 23nm leave for 10 mins then stage 2 its turn 70 degrees hope this helps

Mains Stage 1 83nm
Mains Stage 2 167nm

Big ends Stage 1 29nm
Big ends Stage 2 45 - 60 degrees

Hope this helps