SOURCE: intake manifold torque specs and
Fig. Exploded view of the upper and lower intake manifold and fasteners
- Position the rocker arms in their original locations and tighten to the proper specifications.
- Install lower the intake manifold attaching bolts. Apply sealant
or equivalent thread locking compound to the threads of bolts. Tighten
the vertical bolts first, then the diagonal bolts to 115 inch lbs. (13
Nm).
- Install the upper intake manifold and tighten the mounting bolts to 18 ft. lbs. (25 Nm).
Hope helps (remember to rate this).
SOURCE: whats the torque spec on
The torque specs are available in most shop manuals, but I'm sure you knew that already. There's no need to rush out and buy the shop manual if you don't want to. Go to www.autozone.com and register for free. Once registered you'll have access to repair manuals for your vehicle.
SOURCE: Intake Manifold tightening sequence plus torque specs
start in the middle and alternate left to right and the torque on a alloy manifold will be around 14lbs or a nip with a 3/8th drive rachet ,any water passages use contact adhesive around the water ports .
Testimonial: "Thank you for the help......appreciate it"
328 views
Usually answered in minutes!
×