2007 Toyota Sienna Logo
D
David Griffith Posted on May 13, 2014
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

In my '07 Sienna, none of the lights behind the front seat inside the car are working. I changed one bulb out to see but that didn't work. Any thoughts?

The front seat dome lights work, the vanity lights work for driver and passenger, but none of the lights that are located behind the front seats are working.

1 Answer

J.D. Browning

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Toyota Master 2,760 Answers
  • Posted on May 14, 2014
J.D. Browning
Toyota Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Mar 12, 2009
Answers
2760
Questions
0
Helped
1013806
Points
6696

Don't these only light if back doors are opened , if so ck the door switches on both sides im betting there's one or both of them that might have gotten hit or bent and is just not quite looking right ?

1 Related Answer

Anonymous

  • 10865 Answers
  • Posted on Apr 11, 2009

SOURCE: 2004 sienna toyota van electric door not working

The first thing to check is the fuse that controls that door's motor. Look in your manual for the fuse chart. Determine where the fuse panel is and which fuse it is. Pull that fuse and take a close look to see if it has blown. If so, replace it with a new one of the same amperage

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

07 dodge ram 1500 brake lights and rear blinkers dont work. fuses and bulbs good.

my buddy had the same problem he found a loose wire located behind the panel just in front of the driver door start with the fuze panel the wire connections are a bit cheezy with a friend watching wiggle those wires and see if you can find it there
0helpful
1answer

Replaced a tail light and now vehicle not registering brakes are being pressed.

some times on these the brain tells there was a fault now you have changed the bulb the brain still thinks the fault is still there you can disconect the battery for 10 mins then put the battery back on and hopfully the brain should have reset hope this helps
1helpful
1answer

I drive a 2004 Toyota Sienna LE. Recently I changed a burnt out brake light bulb. I also changed a burnt fuse once my turn signals went spastic. After changing the burnt fuse, my signals now work fine. Now...

you have fitted a single pole bulb into a two pole socket ,have a good look at the end of the bulb and the look inside socket and you will see what i mean
1helpful
1answer

The light behind hte speedometer has gone out. All other lights in dash work. What do we do to replace that light? It is a Toyota Sienna 1999

the bulb is most likely blown,you need to remove the instrument panel to replace it......hope this helps......cheers
0helpful
1answer
1helpful
1answer

Right side brake light was not working, so i took it out to change the light bulb if the bulb was bad but the bulb still works. I placed it back in and now none of the rear brake lights work and the...

Check your brake light fuse, also make sure you installed the bulb in the right way, if not in the right way will blow a fuse and will also not let you shift gear's due to blown fuse.
0helpful
1answer

How do I change bulbs in front parking lights on my 07 gmc yukon?

when the hood is open look behind the light assembly the bulb is connected to the back just twinst off both sides sometimes you will need to remove the whole light assembly from the vehicle usually four bolts
0helpful
2answers

I just bought a 07 chevy colorado a few months ago and now none of my brake lights work. what could it be?

after u check all the bulb try to check the fuses if its ok change the brake light switch which is located front of the brake pedal
0helpful
1answer

Interior lights

bad electrical grounds ... check all systems for poor grounds ..first poster... you have water or moisture issues as well as perhaps ground wiring issues causing premature faliures of bulbs and other.. the lens' pop off to replace bulbs
Not finding what you are looking for?

122 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...