2003 Chevrolet Impala Logo
Posted on Jun 23, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Serpentine belt diagram for 2003 chevy impala

Need a serpentine belt diagram for 2003 chevy impala

Answer This Question
  • 5 more comments 
  • Anonymous Mar 13, 2014

    need exploded view of 2003 chevy impala front end

  • Anonymous Mar 17, 2014

    My 2003 chevy impala keep cutting off and runs sluggish what is the problem

  • Anonymous Mar 18, 2014

    What can make a 2003 chevy impala cut off and makes the motor jump

  • Anonymous Mar 23, 2014

    i don't see how to get out from the bottom because of way the frame is built

  • Anonymous Mar 23, 2014

    I don't see how to get it pass the frame

  • Anonymous Mar 29, 2014

    My wipers on my 2003 Chevy Impala won't shut off

  • Anonymous Mar 29, 2014

    Why won't the wipers on my 2003 Chevy Impala shut off?

×

2 Answers

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Master 314 Answers
  • Posted on Jun 23, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: Jun 09, 2009
Answers
314
Questions
1
Helped
138489
Points
1069

Send an email to [email protected] and I will send the diagram to you

brbamaa

Level 1:

An expert who has achieved level 1.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 4 Answers
  • Posted on Oct 05, 2014
brbamaa
Contributor
Level 1:

An expert who has achieved level 1.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

Joined: Aug 18, 2009
Answers
4
Questions
7
Helped
4784
Points
6

Look on top of where the water pump is there dhould be a simple guide mounted there.

Ad

3 Related Answers

ZJLimited

ZJ Limited

  • 17989 Answers
  • Posted on Jan 25, 2010

SOURCE: Need to have belt diagram for serpentine belt for

2000 CHEVROLET IMPALA - V6 3.4L 207ci GAS FI N E

bfe9804.jpg


2000 CHEVROLET IMPALA - V6 3.8L 231ci GAS FI N K

0719873.jpg


Hope thats helped (remember rated this) Good luck.

Ad

Anonymous

  • 126 Answers
  • Posted on Apr 25, 2009

SOURCE: serpentine belt

If you have purchased one call parts place and they can explain, if not when you get one ask them,< also check on bottom fron of hood or radiator cover, there is usualy diagram there.

Anonymous

  • 12 Answers
  • Posted on Dec 23, 2009

SOURCE: 95 Chevy Impala 5.7l serpentine belt diagram

If you will look under the hood around the radiator or on the underside of the hood it should be on a sticker there for you to look at.  

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2009 Chevy Impala. Diagram for the serpentine belt routing please?
you did not specify what engine.
google 2009 chevy impala serpentine belt Diagram


copy and paste

https://www.justanswer.com/chevy/3ruw6-need-serpentine-belt-diagram-2006-chevy-3-5-lt.html

https://www.fixya.com/cars/t15630016-diagram_serpentine_belt_2009_impala_3_5l
Read full answer
Nov 13, 2023 • 2009 Chevrolet Chevrolet Impala LT
0helpful
1answer

2008 Chevy Impala LTZ 3.5. I need a diagram for serpentine belt please?
Question edited for clarity, and correct order of information and toss in a few CAPS where needed.
Question moved to model category.

All Impala are the same, only difference is bore and stroke for the extra capacity.

https://www.google.com/search?q=2008+chevy+impala+3.5+serpentine+belt+diagram

..
Read full answer
Jan 21, 2023 • 2008 Chevrolet Impala LTZ
1helpful
1answer

Need diagram for 2004 chevy impala serpentine belt
Which engine do you have ?
There should be a diagram on the hood or the radiator support.
Read full answer
Jul 28, 2012 • 2004 Chevrolet Impala
0helpful
1answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3
Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

    • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb
    Read full answer
    Sep 21, 2011 • 2003 Chevrolet Impala
    4helpful
    2answers

    I need the serpentine belt diagram for a 3.8 2003 Impala.
    There should be a diagram of the belt routing under the hood somewhere. clay58_53.png
    Read full answer
    Jul 03, 2011 • 2006 Chevrolet Impala
    1helpful
    2answers

    Need diagram for serpentine belt for chevy imo l s 2003
    Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 2003 Chevy Impala.

    http://www.2carpros.com/car_repair_information/year/2003/make/chevrolet/model/impala/2003_chevrolet_impala_drive_belt_routing_diagram.htm

    GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
    A. Find the Tensioner(s). (See Diagrams on Link)
    B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
    C. Remove the loosened belt off one of the other more easily accessed Pulleys.
    D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

    Standard Rules for Installing the Serpentine Belt with Tensioners:
    a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
    b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
    c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
    d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
    e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

    Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!
    Read full answer
    Mar 30, 2010 • 2003 Chevrolet Impala
    4helpful
    2answers

    Need to have belt diagram for serpentine belt for 2.8 2003 chevy impala
    2000 CHEVROLET IMPALA - V6 3.4L 207ci GAS FI N E

    bfe9804.jpg


    2000 CHEVROLET IMPALA - V6 3.8L 231ci GAS FI N K

    0719873.jpg


    Hope thats helped (remember rated this) Good luck.
    Read full answer
    Jan 25, 2010 • 2000 Chevrolet Impala
    0helpful
    2answers

    95 Chevy Impala 5.7l serpentine belt diagram
    b456a92d-d154-4f09-a50b-6ef254f82274-pcxygl2g2h3zcuxuvtjr3f5a-d-0.jpeg
    Read full answer
    Dec 23, 2009 • 1995 Chevrolet Impala
    0helpful
    1answer

    I need a serpentine belt diagram for a 2003 chevy impala 3800
    It's under the hood, a white sticker, should be on top of the radiator.
    Read full answer
    Sep 27, 2009 • 2003 Chevrolet Impala
    0helpful
    1answer

    Serpentine belt
    If you have purchased one call parts place and they can explain, if not when you get one ask them,< also check on bottom fron of hood or radiator cover, there is usualy diagram there.
    Read full answer
    Apr 25, 2009 • 2003 Chevrolet Impala
    Not finding what you are looking for?

    View Most Popular

    2003 Impala

    • Cars & Trucks

    Related Question

    2009 Chevy Impala. Diagram for the serpentine belt routing please?

    • 2009 Chevrolet Chevrolet Impala LT

    Related Topics

    4,236 views

    Ask a Question

    Usually answered in minutes!

    Popular Questions

    What does the word CAL mean that shows on the dash

    2006 Chevrolet Impala

    Shifter stuck in park!

    2007 Chevrolet Impala LS Sedan New...

    Where is the evap vent valve soleniod located on

    2010 Chevrolet Impala

    Where is the oxygen o2 sensor located on 2004

    2005 Chevrolet Impala

    How to reset the airbag light on chevy impala 2009

    2009 Chevrolet Impala

    Check Out the Latest Top Trucks Report!
    Check Out the Latest Top Trucks Report!

    View all Fixya Reports

    Top Chevrolet Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6988 Answers

    john h

    Level 3 Expert

    29494 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    PDF Manual
    . 2003 Impala Manual

    2003 Impala

    Loading...