Question about 1991 Chevrolet S-10 Blazer

1 Answer

1991 S10 blazer 4x4 4.3 popping coming from the front

On my 91 chevy s10 blazer 4x4 4.3 has a popping sound coming from the front end when I hit a bump it sounds like a bad shock but it's not,...Also my 4 wheel drive light on the floor is stuck on 4 low and the two front wheels is lit up also...The 4 wheel drive works good but the lights won't go off. I changed the box under the shifter. Any help would be appreciated.

Posted by Anonymous on

Ad

1 Answer

Dennis Saunders

Dennis Saunders

  • Level 2:

    An expert who has achieved level 2 by getting 100 points
    MVP:

    An expert that got 5 achievements.
    Governor:

    An expert whose answer got voted for 20 times.
    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

The popping sound is the stabilizer links or the lower control arm bushings you can replace all bushings and both link kits for around 50.00 and the light is prob from the sensor on the transfer case or the front end i would remove and clean with dawn dishwashing liquid and put them back.

Posted on Jun 23, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm repacing the front sway bar bushings on my '91 chevy s10 blazer 4.3 4x4, and the
When you replace the sway bar bushing you buy the kit and it should come all that you need except tools. you should have 4 bushing,2 tube looking things,4 washer things,2 long bolts. 2 flat washer,2 lock washer,2 nuts, let me know how it went

Apr 23, 2011 | 1991 Chevrolet S-10

1 Answer

I need diagram for firing order on a 91 s10 blazer 4.3 2wd
For the 1991 Chevrolet S10 Blazer 4.3 V6, Both: 2WD AND 4WD:

Firing Order:
1-6-5-4-3-2

Cylinders:
.......(back).......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)

Distributor:
....(back)
(+).4...3
5...........2
..6...1..(+)-screw
.....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 12, 2010 | 1991 Chevrolet S-10

1 Answer

Need firing order diagram for 91 s10 blazer
991 Chevy S10 firing order
The firing order for a Chevy s10 depends on which engine you have.
1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise.
2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise.
2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise.
2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise.
4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

Jan 09, 2010 | 1991 Chevrolet S-10

1 Answer

Where is the fuel input line 91 s10 blazer
one is a return

Jan 01, 2010 | 1991 Chevrolet S-10 Blazer

3 Answers

1991 Chevy S10 Blazer 4.3 4x4
4170636.jpgThis is all I've got.Hope this helps?

Dec 20, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

91 chevrolet s10 blazer heater core access?
not really. IT is under the dash on the passenger side. You should put some plastic down or pull the carpet or it will get soaked with anti freeze

Oct 01, 2009 | 1991 Chevrolet S-10

1 Answer

Need the fuse diagran fo chevy blazer s10 4wd 1991
go to autozone.com, enter your vehicle specs, and follow the prompts for the repair section, then to electrical diagrams..........and its FREE!

Apr 10, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

91 chevy s10 junk
did you try changing the fuel filter or scanning for codes? This would be a great place to start.

Mar 12, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

My 1991 chevy s-10
when i start my 91 s10 blazer it try to stall so i have to give it gas to keep it running then when i leave out of the drive way and go down the road it has problem get the right amountof gas to go but once it hit 60 -70 mile an hour its fine

Dec 31, 2008 | 1991 Chevrolet S-10 Blazer

2 Answers

1991 Chevy Blazer S10 window motor installation
http://www.a1electric.com/s10motor.htm. This link has pictures and step-by-step instructions. I found it and have both sides to replace. Hope this helps.

Aug 08, 2008 | 1991 Chevrolet S-10 Blazer

Not finding what you are looking for?

View Most Popular

1991 S-10 Blazer

  • Cars & Trucks

Related Question

I'm repacing the front sway bar bushings on my '91 chevy s10 blazer 4.3 4x4, and the

  • 1991 Chevrolet S-10

Open Questions:

0 Answers

i have a chevy s10 blazer and there is this electrical vacuum connector by the battery numbers on it are 2080A 15736461 ? runs rough but idles perfect. i put new in take . i left the stove top and flap. how to reset ecm?? it is motor Z TBI

Jan 10, 2016 | 1991 Chevrolet S-10 Blazer

0 Answers

runs good forout an hour then shuts off and won't start for hours,thruns good again plese advise what i can check.

Jul 08, 2014 | 1991 Chevrolet S-10 Blazer

0 Answers

wheel barrings for 1991 chevy s 10 blazer

Jul 02, 2014 | 1991 Chevrolet S-10 Blazer

0 Answers

pictures of vaccum hoses for 1995 Chevy blazer

Jun 16, 2014 | 1991 Chevrolet S-10 Blazer

See all 1991 Chevrolet S-10 Blazer Questions

Related Topics

1991 Chevrolet S-10 Blazer Logo

996 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

2000 Chevrolet Blazer

1997 Chevrolet Blazer

2006 Chevrolet Blazer

2002 Chevrolet Blazer

1993 Chevrolet S-10 Blazer

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23577 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...