1998 Toyota T100 Logo

Related Topics:

A
Anonymous Posted on May 05, 2014

How do you adjust door on 1998 toyota t100 truck

My passenger door will rattle going over ruff road like when you don't close the door properly. How can I adjust it so it is more secure?

5 Related Answers

Anonymous

  • 7 Answers
  • Posted on Mar 22, 2009

SOURCE: the security system is going off in my toyota tundra 2001 truck

lock the doors then shut it and unlock it with the key on drivers side it should go off and start

Ad

Anonymous

  • 12 Answers
  • Posted on May 25, 2009

SOURCE: 1998 TOYOTA CAMRY RIGHT PASSENGER SIDE DOOR OUT

Look at these picture, step by step:
http://www.bodyshopzone.com/archives/trim/door_panels/Toyota/Camry_2000_front/removal_f4.html

Anonymous

  • 255 Answers
  • Posted on Sep 08, 2009

SOURCE: 1996 Toyota T100 4WD. Apparently the front

take apart and clean mud/rust out of wheel hubs.

perdue40

  • 589 Answers
  • Posted on Nov 06, 2010

SOURCE: 1998 Toyota Sienna. Problem: Passenger side

Have you tried replacing the master window switch? Just because the other windows work doesnt mean that switch for that window is good.

The main switch is controled by the drivers door main unit.....i had to use a forward force on my windows switch for it to work....so replaced the whole unit, you could find those on ebay cheap if local auto parts is expensive

Anonymous

  • 72 Answers
  • Posted on Sep 03, 2011

SOURCE: 1998 Toyota t100 with 140k

Sounds like a possible throttle positioning sensor.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Jumped dip in road at 80mph, now front pulls to right and wears passenger front tire. cannot be repaired with alignment.

It sounds like something else got bent. You need to go to a frame shop and have them measure it up, then it should align.
1helpful
1answer

Power windows on 1998 mercury sable not working

Repair the passenger door such that the warning light goes out. Either adjust the switch outward or adjust the door latch inward. If you cannot get the light go o out that way, you can disable the switch by disconnecting tbe cable, taping the connector, and tucking the wire back into tbe body.
0helpful
1answer

The doors do not close properly. Every time you hit a bump in the road the doors rattle.

I have this on my 2003 Expedition also. The doors get "loose" on the hinges and they can be adjusted at a garage. I have mine tightened every few years - usually when it's in for other service - the charge is minimal.
0helpful
1answer

Front disc brake rotors on Toyota T100 4wd

Remove the calipers like on any other vehicle. You will have to remove the hubs as the rotors are attached to them. It's more involved that a standard passenger vehcle.
1helpful
1answer

Passenger door for 96' toyota t100 don't open from inside and outside

im guessing the linkage fell off inside the door, take your interior panel off, an look for a long cable dangling or laying on the bottom off the door
1helpful
1answer
0helpful
1answer

Lack of smooth gear operation, rattling on front suspension over ruff surface

half shafts can cause a lot of problems with shifting and driving. but you could be loosing the third gear syncronizer.
0helpful
1answer

1996 T100 door stop "sprung"

got an answer from Just Ask for $15. The expert said to take it to a body shop. He gave some hints about what is stressed and a couple good reasons why a non experienced person should not attempt this repair.
Not finding what you are looking for?

724 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...