SOURCE: ignition firing order
The 3.5L (VIN H) engine's unique ignition system has the ignition coils directly over each plug. No spark plug wires are used.
3.5L (VIN H) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System
The firing order for the 3.1L VIN M, 3.4L VIN E, 3.4L VIN X and 3.5L
VIN H engines is 1-2-3-4-5-6. The right bank cylinders are on the cowl
side (rear) of the engine compartment and are numbered 1,3,5, left bank
cylinders on the front side of the vehicle, are numbered 2,4,6.
3.1L (VIN M) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System
3.4L (VIN X) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System
3.4L (VIN E) engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System
The
firing order for the 3.8L VIN K and 3.8L VIN 1 engines is 1-6-5-4-3-2.
Starting at the front of the engine, cylinders in the left bank are
numbered 1,3,5 and cylinders in the right bank are numbered 2,4,6.
3.8L (VIN 1) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System
3.8L (VIN K) engine Firing order: 1-6-5-4-3-2 Distributorless Ignition System
I hope help you with this, remember rated this help. Good luck.
SOURCE: firing order in coils, cavalier,
STANDING IN FRONT OF CAR FROM LEFT TO RIGHT CYLINDERS ARE 1 2 3 4 NOW LOOKING AT COILS STANDING FRONT CAR THIS IS COIL SPARK PLUGS WIRES LOCATION WRITE THESE NUMBERS DOWN IN A ROW LIKE NUMBER 2 ON TOP 4 BOTTOM 2 3 1 4. THESE NUMBER IN A ROW IS WHERE YOURS SPARKS LOCATION FROM COILS TO CYLINDER SPARK PLUGS.
Firing Orders
GM Cavalier/Sunfire 1995-2000 Repair Guide Print Fig. Fig. 1: 2.2L (VIN 4) Engine Firing Order: 1-3-4-2 Distributorless Ignition System
FIRING ORDERS
See Figures 1 and 2
To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes to reflect how your engine is wired.
3.8L engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System
568 views
Usually answered in minutes!
×