SOURCE: Location of the Oil Pressure Sending Unit
On the drivers front of engine block below the cylinder head & gasket . Slightly behind waterpump.
SOURCE: finding the oil pressure sending unit for 2002 mercury mountainee
The sending unit is the likely culprit if you are getting appropriate oil pressure. I am not sure where the sending unit is on this vehilce but a quick phone call to a dealer will solve that problem.
If I can be of any more assistance please let me know.
Have a great day
SOURCE: I have a 1989 Ford F 450 Super Duty, 7.3.L DSL
oil pressure sending unit is close to oil filter.temp sending unit on front of intake.check fuses for temp sending unit and coolant temp gauges if all is good make sure grounding is good.if grounds good your gauges is faulty.
SOURCE: no oil pressure
It could be the sending unit,but it could also be the high pressure bypass on the oil pump itself,the sending unit will be on the side of the motor usually close to the oil filter.
SOURCE: wheres the oil pressure sending unit located on a
Oil pressure switch is on the lower left front of engine. Low oil level switch is on the lower center of the engine.
Testimonial: "how hard is it to get to and replace? how do i recognize it?"
1,293 views
Usually answered in minutes!
×