Question about 2005 Peugeot 407 1.8

Open Question

Engine fault repair needed - 2005 Peugeot 407 1.8

Posted by Anonymous on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just had my ac compresser replaced in my bmw e90 320i 2005 and now its saying to check engine please help is there a sensor that may need replacing


run the fault codes to see what put the engine light on
engine lights operate for engine faults and transmission faults
during the ac repair , a wire could have become disconnected
Consider it as a unrelated problem to the AC

Nov 03, 2017 | BMW Cars & Trucks

1 Answer

Engine check light not coming on when the ignition switch is on on position without engine runing


Could be a fuse or maybe needs the bulb or led replacing, maybe a dashboard circuit board fault or wiring fault or even a problem with the engine management ECU.

Needs checking out starting with a fuse check and a fault code reading to check whether the system is alive or not. After that it would be advisable to have a repair manual and wiring diagram to hand...

Jun 26, 2016 | Cars & Trucks

2 Answers

Could my engine be gone it my car stopped and engine light came on?


If the check engine light has illuminated then you need to have the fault codes read from the OBD to know exactly what the cause is! There could be a whole host of reasons for this light coming on.

Mar 20, 2016 | Cars & Trucks

1 Answer

Skoda superb (2011) engine fault warning random occurrance. Switching engine off and on again clears fault until next random occurrance. Solution?


Sounds like a hard code in PCM, needs scanner to read code and after repair clear it, shouldn't come back after repair.

Aug 02, 2014 | Skoda Superb Cars & Trucks

1 Answer

Yellow led engine light illuminated..why


it lights up because the CPU has recorded a fault that needs urgent attention. stop check oil and coolant levels. have a fault code reading done and fix the fault. To continue driving will eventually place the engine in low power mode or will cause big dollar repairs.

Dec 26, 2013 | 2006 Mini Cooper

1 Answer

Engine fault also is trembling


Engine fault light, for the oxygen sensor failure, (the reason is low grade gasoline, octane number cannot be reached a certain quantity of heat, so that the oxygen sensor is unable to transfer to the main computer signal. No signal indicates the fault, computer memory feedback to the fault lamp). The petrol for 97# try. Can also use car diagnostic tool to diagnose department to clear the fault with the decoder. Recommended repair repair.

Nov 29, 2013 | Mazda Cars & Trucks

1 Answer

Service engine soon light what repairs might i need?


First, check if this warning is a SERVICE SOON or a CHECK ENGINE light. First just is a reminder that you need check or change fluids, filters and periodical maintenance. Check engine light measn that some fault code is detected and some sensor is sending this signal to the coputer car, you will need scanned the computer car with OBD scanner reader tool in order to know exactly what is the fault code number stored there.

Hope this helps.

Feb 05, 2013 | 2004 Ford Explorer

1 Answer

Engine warning light


Hello and welcome to fixya.com
turned on by the systems computer it is to alert you to the fact that the computer module has detected a fault in the systems operation, this can be the engine, the emissions system or the transmission. What must be done now is to have the system scanned for fault codes, these are called OBD2 fault codes, then diagnostics are performed to determine the cause of the fault codes and repair made based on the diagnostics performed.

Jun 19, 2012 | 2005 Ford Focus

3 Answers

Is the check engine light considered to be a sensor? My car failed smog due to sensor lights, do i have to go to a dealer to have the problem resolved, or can i do it myself


your car failed because they wont pass you until the light has been reset. the check engine light means the computer detected a fault in a sensor or system that may need repair..you"ll need access to a shop or someone who has an obdII diagostic reader and see what was faulted..you might get lucky and can have the fault reset. If there is a true failure in the system the light will come back on again and repair will be needed. usually the code will tell you which component or sensor has failed. if you like you can purchase one of these devices from an Autoparts store for around $100..these more expensive models are preferred because they not only will reset the fault but will list the code and tell you exactly which sensor has failed... that is if your car has an obdII type system diagnostic connector; usually located under the drivers steering column.

Apr 28, 2010 | 1996 Toyota Celica

Not finding what you are looking for?
2005 Peugeot 407 1.8 Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

xxxxxx xxx

Level 3 Expert

5023 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...