SOURCE: ignition problem
It should be underhood, driver side on upper firewall, it does not look like a typical ignition module, but I looked around and for your info, you can find a picture of it on autzone.com Hope this helps.
SOURCE: I have a 1998 dodge ram. Does the transmission
No ..there is no vacuum modulator on any dodge transmission...they never ever had them
SOURCE: 1989 Dodge Truck B250 Van V8-318 ignition control
its built into the ecm located right in the middle of he firewall from under the hood, big black box with two plugs.
SOURCE: i have a 1993 dodge d150 318 no spark or no power
A BAD CRANK SENSOR WOULD NOT CAUSE A LOSS OF POWER TO THE FUEL PUMP. ARE U SURE ABOUT THAT, THE FUEL PUMP ONLY RUNS FOR 1 SECOND WHEN THE KEY IS TURNED ON UNBLESS ENGINE IS STARTED. DO A FAULT CODE TEST ON THE COMPUTER, GO TO THE WEB LINK FOR INSTRUCTIONS AND A FAULT CODE LIST, VERY EASY TO DO.
http://www.extreme-check-engine-light-codes.com/Chrysler%20OBD1%20Decoder.htm
SOURCE: where is the ignition control module located on a
Part of the PCM/Computer,I know they had a different name for that, on a chrysler product,not separate item you can replace.
425 views
Usually answered in minutes!
×