- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
make sure connections on adjustment rods for tranny r tite n not "slippin"...always chek for bent linkage if u can't get it just the way u want it...especially if u have been speed-shiftin...
to add transmission fluid,lift the hood.
look near rear of engine for a thin tube with a dipstick
NOT THE engine oil dipstick,.
to add transmission fluid,you will need a narrow funnel that will fit in dipstick tube.
and that is where you add the fluid
it sounds as if you need to replace the transmission...i don't really thing that a flush or service will help at this point...if trans is slippin already, locate a transmission from your local auto wreckers and replace it...or go new..
The bands in your transmission are on their way out.. It doesn't do it (as bad) in 4lo because of the low gearing.
Time for a transmission rebuild or replacement.
Look usally when they start slippin,,, its gettin close to getin a rebuild,, but not always ,,it could have old transmission fliud in there. you can change the transmission fliud ,, thats should help,see it could be cloged up,, change fliud and the filter in tranny,, ,,cheaper than a transmission,, ,goodluck
×