Question about 1993 Ford Probe

1 Answer

Need wiring diagram for alpine graphics equalizer

7 band equalizer

Posted by terry fletcher on

Ad

1 Answer

peter colley

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

Hi there

Use the 'Google' search engine and type in support.alpine-usa.com/products. You will be able to download a pdf manual on your model.

Posted on Apr 13, 2014

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 to stereo code


www.vichylashes.com/3D-invisible-band-mink-lashes/ 3D invisible band mink lashes The Benefits of Buying 3D invisible band mink lashes Online -Vichy Lashes OEM Manufacturer 3D invisible band mink lashes with wholesale price is shipped directly from our lashes factory. We supply top quality mink lashes with Worldwide shipping and free sample. If you need more natural lashes with Private Label Branding Packaging, shop from our professional mink lashes shop.
http://www.vichylashes.com/3D-invisible-band-mink-lashes

May 09, 2018 | Cars & Trucks

2 Answers

100mm equal what in inches?


Hi Jehaad:
100 mm equals 10 cm

1cm equals 0.3937007 inches
10 cm equals 3.937007 inches
100 mm equals 3,937007 inches

Apr 03, 2015 | 2000 Ford Expedition Eddie Bauer

1 Answer

Band adjustment, how many turns out on 1987 300zx


Transmission Bands are adjusted when you rebuild a trans

They do not wear enough to need adjustment

Two things happen

If you turn the screw the wrong way, parts fall inside the trans
& you can't get it back together

Next-- if you need to adjust the band or bands, it is time for a rebuild, as many many parts are worn, long before the slightest band wear.

Mar 19, 2014 | Nissan 300ZX Cars & Trucks

1 Answer

1997 grand prix 4 door radio wiring diagram


Go to your local dealership repair shop. They can scan a copy for you. It will make it all very easy when you have the wire colors and circuit description.

Jul 22, 2012 | Cars & Trucks

1 Answer

1987 cadillac 3rd gear band adjustment


That's a transaxle correct? 4T60E?

There is no band adjustment

If a band on any trans wore enough
to need adjustment,then the trans would
need an overhaul

Jun 26, 2012 | 1987 Cadillac DeVille

1 Answer

Can the bands be tighten in the transmission on a 1991 lincoln towncar


Tightening the band will not acomplish anything
The band is brought down tight on the drum,when
the unit is built or rebuilt,then you loosen the band
approx 1 &3/4 turns,and that is it,forever,done.

As the band wears do you need to readjust
You can but it is a waste of time,you won't gain
much in the way of reduced travel or apply time.

The point here is,band adjustments fix nothing
and are not preventative maintainance in my
experience

Feb 03, 2011 | 1991 Lincoln Town Car

1 Answer

2000 Dodge Durango - P1757 GOV Pressure Not Equal


I have had to replace the governor on those dodge transmissions, and there is a filtering metal mesh screen around the governor inlet port that seems to always get plugged up with small metal shavings. The governor is located under the transmission pan to the rear of the main valve body.

May 05, 2010 | 2001 Jeep Grand Cherokee

1 Answer

I have a 1997 ram 1500 5.9 2x4 and im missing 2nd gear it shifts at about 35-40 mph. When I changed my tranny fluid and filter I found what looked to me like one of the paper discs from a cluch pack now my...


Those paper disc are from you 2nd gear band. You will need to replace the band. The front band is the 2nd gear band. The first thing I would try is to adjust the band. If there is still some material left on the band adjusting it will get you by for a while. The adjustment for the 2nd gear band is on the outside of the case. If you want me to post the adjustment procedure, let me know and i will.

Apr 24, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Transmission overhauled, however, band overadjusted


Bands are not adjustable. Why do you think it's a band issue? The band only comes on during manual second gear, not second gear while in drive. It sounds like a check ball was inadvertently left out of the valve body during reassembly.

Feb 26, 2010 | Chevrolet TrailBlazer EXT Cars & Trucks

1 Answer

Jeep grand cherokee revs for to high before changing gear


Message:
My 2002 Dakota has been somewhat confused about shifting as well. It showed a code P1762. I dropped the pan to install a new fluid filter and fluid-(use only ATF+3 or ATF+4). Since the pan was off I decided to adjust the bands. The front band controls the 2nd gear cluster. The rear band controls the 3rd gear cluster and reverse. For a 2-3 shift, the transmission shifts back to 1st gear with the front band while the rear band engages 3rd gear. If the front band does not release the 2nd gear clutches before the third gear clutches engage, the transmission binds, which shortens the life of the transmission clutches. If the front band releases too early in the shift, the engine will overspeed (sounds and feels like a slip) during the 2-3 shift.
The front band adjusting screw is on the driver's side above the shift linkage. The rear band is inside the fluid pan near the filter.
1. Loosen band adjusting screw locknut. Then back locknut off 3-5 turns. Be sure adjusting screw turns freely in case. Apply lubricant to screw
threads if necessary. The front band adjuster is on the outside of the transmission and the locknut requires a 3/4" wrench.

2. Using Inch Pound Torque Wrench C-3380-A, a 3-in. extension and appropriate Torx� socket (T-40), tighten adjusting screw to 72 in-lb. CAUTION: If Adapter C-3705 (from SPX Miller) is needed to reach the adjusting screw, tighten the screw to only 47-50 in. lbs. torque.

3. Back off adjusting screw the number of turns listed below for your transmission.

4. Hold adjusting screw in place and tighten lock-nut to:

41 N�m (30 ft. lbs.) for the front band
34 N�m (25 ft. lbs.) for the rear band
The adjustment screw inside the case is a square head bolt. You will need a 1/4 square head socket to fit your torque wrench.
Band adjustments for each model year:
1994

* Front Band - tighten to 72 in-lb, back off 2-1/2 turns (all transmissions)
* Rear Band
o 32/42RH - Tighten to 72 in-LB, back off 4 turns
o 36/37/46/47RH - Tighten to 72 in-lb, back off 2 turns

1995-1996

* Front Band
o 42RH - tighten to 72 in-lb, back off 2-1/4 turns
o 46RH - tighten to 72 in-lb, back off 2-7/8 turns
o 47RH - tighten to 72 in-lb, back off 1-7/8 turns
* Rear Band
o 42RE/RH - tighten to 72 in-lb, back off 4 turns
o 46RE/RH - tighten to 72 in-lb, back off 2 turns
o 47RE/RH - tighten to 72 in-lb, back off 3 turns

1997-1998

* Front Band
o 42RE - tighten to 72 in-lb, back off 3-5/8 turns
o 46RE - tighten to 72 in-lb, back off 2-7/8 turns
o 47RE - tighten to 72 in-lb, back off 1-7/8 turns
* Rear Band
o 42RE - tighten to 72 in-lb, back off 4 turns
o 46RE - tighten to 72 in-lb, back off 2 turns
o 47RE - tighten to 72 in-lb, back off 3 turns

1999

* Front Band
o 42RE - tighten to 72 in-lb, back off 3 turns. (TSB 21-16-98)
o 47RE - tighten band adj. screw to 72 inch pounds, back off 1 7/8 turns
* Rear Band
o 47RE - tighten band adj. screw to 72 inch pounds, back off 3 turns
+ The 47RH rear band requires a 1/4" hex driver, the front band requires a
T-30 Torx driver, the filter is held in place by two screws which require a T-20 Torx drive

2000-2002

* Front Band
o 42RE - Tighten band adj. screw to 72 in-lb, back off 3 turns
o 44RE - Tighten band adj. screw to 72 in-lb, back off 1 7/8 turns
o 46RE - Tighten band adj. screw to 72 in-lb, back off 2 7/8 turns
o 47RE - Tighten band adj. screw to 72 in-lb, back off 1 7/8 turns
From Bill Konolday's 47RE notes: I usually go a little looser than factory
specs on this front band - backing off the adjustment screw 2 or 2 1/4 turns.
Depending on the circumstances I have backed off the band up to 2 1/2 turns.
* Rear Band
o 42RE - tighten band adj. screw to 72 inch pounds, back off 4 turns
o 44RE - tighten band adj. screw to 72 inch pounds, back off 4 turns
o 46RE - tighten band adj. screw to 72 inch pounds, back off 2 turns
o 47RE - tighten band adj. screw to 72 inch pounds, back off 3 turns

2003

* Front Band
o 48RE - tighten band adj. screw to 72 inch pounds, back off 1-3/4 turns
* Rear Band
o 48RE - tighten band adj. screw to 72 inch pounds, back off 3 turns

2005

* Front Band
o 48RE - tighten band adj. screw to 72 inch pounds,
back off front band adjusting screw 1-3/4 turns for diesel vehicles,
or 1-1/2 turns, for V-10 vehicles.
* Rear Band
o 48RE - tighten band adj. screw to 72 inch pounds, back off 3 turns

94+ Automatic Transmission Bolt and Nut Torque Specs

* Front band adjustment locknut - 30 ft-lb
* Rear band adjustment locknut - 25 ft-lb
* Transmission pan bolts - 13 ft-lb
I just replaced the solenoid with the recommended transducer and all is fine now. The transducer cost me about $50 at a nearby dealership.
Hope this helps. -zman. [email protected]

Dec 09, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
1993 Ford Probe Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...