- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P0102 is a Mass air flow code. If you recently installed a K&N air filter it is possible some oil from the filter has gotten onto the sensor and damaged it. This code does not mean the sensor is faulty though. You could have an intake air leak which would also cause the code.
The oil filter is located on the drivers side of the engine,close to the radiator.It has a round plastic filter cover youll have to use a wrench to remove it.Once you remove the lid pull the filter out.
The engine oil filter is located just right of center if standing in front of the car. By removing the LARGE Black cap with the 36mm nut you will expose the filter element, make sure to do this before draining the oil from the drain plug in the pan. Otherwise the filter will still hold oil until loosened a bit. A typical oil change should go like this.
1. Engine Hot, not running, Loosen filter housing, don't remove yet.
2. Drain Oil, Replace plug.
3. Remove and Replace filter and O-Rings
4. Add oil.