At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The low beam fuse in a 2008 Mitsubishi Nativa or Montero Sport is located in the fuse box under the hood. The fuse box is labeled with a diagram of the different fuses and their corresponding amperage ratings. The low beam fuse is typically labeled as "F11" or "11" and has an amperage rating of 30.
If the low beam fuse is blown, it will need to be replaced. To do this, you will need to remove the fuse box cover and locate the low beam fuse. The fuse will be a small, plastic tab with a metal strip running through it. The metal strip will be broken if the fuse is blown.
To replace the fuse, simply remove the old fuse and insert a new one with the same amperage rating. Be sure to replace the fuse box cover before closing the hood.
If the low beam fuse keeps blowing, there may be a problem with the low beam headlights or the wiring. In this case, it is best to take the vehicle to a qualified mechanic for diagnosis and repair.
Here are some additional tips for troubleshooting low beam headlight problems:
Check the headlight bulbs to make sure they are not burned out.
Check the headlight wiring for any damage or corrosion.
Check the headlight switch to make sure it is working properly.
If you have a multi-meter, you can check the voltage at the headlight sockets to make sure there is power getting to the headlights.
There isn't one. A relay is an electronic switch that uses a low amperage or low voltage current to operate contacts to a larger amperage cable. your accessory socket is just a direct cable to a 12 volt power source. The usually have a fuse inline to the cable or sometimes in the fuse box. You should be running anything higher than a couple of amps.
What is a car relay? In the most simple terms an automotive relay is an electronically operated switch. The type most commonly used in the automotive industry is an electro-mechanically operated switch. They are found in all types of vehicles - cars, trucks, vans, trailers and boats.
May 1, 2019
It is almost a sure thing that you have put a lower amperage fuse in a higher amperage socket.
To verify, look at the fuse box cover, it usually has a legend of what fuse goes where, and what the amperage is.
Make sure that you put 15A fuses in 15A slots etc.
Also make sure that the fuses are not burned out, look for the little piece of metal that make the connection, and make sure its intact.
Hi, The fusible link is a WiRE with a connector socket. Most of the fusible link is located at the engine bay fuse box/relay.It is use as a main power source fuse for high amperage voltage.
Max current is 20A for the lighter/power sockets. This can be confirmed two ways -- the first is the power sockets typically have the number printed on the plastic outlet cover, the second is to look in the manual for the fuse ratings on this circuit.
If you look in the Owners Manual, there will be a picture and listing of the fuse placement. You will be able to see it right away if that fuse is the one blown. Also, there may be a diagram on the inside of the fuse box cover of which fuse it is and there should be a little tool there, a fuse puller, and a few spare fuses. Make sure you replace it with the right amperage fuse.
get out your owners manual and start checking the fuses. A legend (fuse number and location) would be either in your owner manual or on the fuse block itself (fuse block usually under dash on driver side)
After locating and the possible culprit (fuse)
pay attention to what you last plugged into that socket, does it draw more than fuse amperage can handle? does it have a short in it?
Go to your owners manual and look up fuses. This will give you a picture of the fuse placement and which one is for the radio. It will also show you where the fuse box is if you are unsure of its location. There are also a few spare fuses in the fuse box and your manual will tell you where they are and if they are the correct amperage. Do not put a larger fuse in because this could result in wires becoming hot and potentially a fire hazzard.
×