2002 Toyota Celica Logo

Related Topics:

A
Anonymous Posted on Apr 04, 2014
Be the first to answer

2002 Celica overheating since the serpentine belt was replaced. Heat takes about 20 minutes to come on in the morning. Engine overheats coming home until the air conditioner is turned on then it runs at normal running temp. Is this a thermostat problem , air in the system problem or was something screwed up when the serpentine belt was replaced ? Thanks Andy

Answer This Question

5 Related Answers

Jonah Oneal

  • 14092 Answers
  • Posted on Mar 24, 2009

SOURCE: toyota celica cuts out

check fuel pump pressure. change fuel filter.

Ad

marionbagget

  • 718 Answers
  • Posted on Apr 08, 2009

SOURCE: 98 Celica overheating problem

c7d7b55.jpg Cooling Thermostat.
Look along the radiator hose where it enters the engine. This controls the water temperature.


toyotacelicathermalfanswitch.jpgToyota Celica Thermal Fan Switch The Toyota Celica thermal radiator fan switch is usually located in the radiator or the engine block and has 2 or 3 wires coming from the unit. The 3 wire switch has a dual sensor for dual speed radiator fans. The Toyota Celica thermo fan switches come in the factory temperature settings and also come in cooler thermostatic settings so the fan will come on at a lower coolant temp.

The Toyota Celica cooling system is made of aluminum components and requires a Phosphate free coolant. DO NOT PUT an over the counter antifreeze in your Toyota Celica, as it will ruin the radiator and water pump.

Anonymous

  • 75 Answers
  • Posted on Oct 03, 2009

SOURCE: 1990 toyota corolla wagon 1.6 liter 5 spd. overheating

you've got a possible blockage in the head or block.

c17hydro

Greg Bernett

  • 2993 Answers
  • Posted on Feb 27, 2010

SOURCE: How to instal serpentine belt Toyota celica 2001

Removal & Installation

  1. Remove the right hand cover under the engine.
  2. Turn the drive belt tensioner clockwise to relieve tension on the belt.
  3. Remove the fan and generator V belt.
  4. Return the tensioner to the unloaded position.

    NOTE When retracting the tensioner, turn it clockwise slowly in 3 sec. or more. Be sure not to apply force rapidly. After the tensioner is retracted all the way, do not apply force any more than necessary.

To install:
  1. Turn the drive belt tensioner clockwise
  2. Install the belt.
  3. Install the right hand cover under the engine.

Anonymous

  • 3092 Answers
  • Posted on Jul 14, 2010

SOURCE: 2001 Celica GT overheating and no heat

Yes start with the thermostat, also need to fine out why it was low on coolant.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

95 Toyota celica 1.8 no power steering and as if it was overheating quickly when I looked it seems at least 1/3 serpentine belts are missing can u please tell me what belts and how to replace them
https://www.2carpros.com/diagrams/toyota/celica/1995
Read full answer
Mar 16, 2017 • Toyota Cars & Trucks
0helpful
1answer

Overheating
I would check your cooling fans. When you turn on the AC, it probably starts a second fan. Maybe the other one is not working?
Read full answer
Feb 21, 2018 • 2002 Toyota Celica
1helpful
1answer

2002 celica no heat /overheating
I doubt that the belt is the problem as you will be have problems with the charging and probably the air con. The most likely problem would be the thermostat. Thermostats have two purposes, firstly they stop water circulating when the engine is cold so that it can reach operating temperature quickly (which also gives you warm air quicker in the morning). Secondly it regulates the speed that the water circulates. If the coolant is circulating too quick then it wont stay in the radiator long enough to be cooled therefore causing the engine to overheat, the air con turns on a thermostatic fan to increase airflow so the cooling will improve that's why the temperature "returns to normal". You will find on colder days the temperature will drop "lower than normal" with the a/c on. It's worthwhile changing the thermostat as you will find that your car will actually run a bit more efficient on fuel. Also check that the fluid in the cooling system is proper engine coolant, that will help considerably with the proper cooling of the engine not to mention reduce corrosion of parts in the system which can be very expensive to replace.
Read full answer
Apr 04, 2014 • 2002 Toyota Celica
0helpful
1answer

Need a serpentine belt digram for a celica gt4 1990
Click on the following direct, Free Link. It has the Drive Belt Diagrams for your 1990 Toyota Celica depending on your Engine Options. It has several other Diagrams that will be very helpful for you.

Let me know if this helped....

http://www.2carpros.com/car_repair_information/year/1990/make/toyota/model/celica/1990_toyota_celica_drive_belt_routing_diagram.htm
Read full answer
Apr 13, 2010 • 1990 Toyota Celica
0helpful
1answer

How long does it take to fix the timing belt in a 2002 toyota celica gt?
Im not sure if your code P1692 acts the same way as a Toyota Celica GT-S, but I read a forum in Newcelica.org in which the solution was an oil pressure switch located on the driverside of the engine nearest the battery, it MIGHT be, dont quote me on it as the 1zz and 2zz engine setup is different. Go to Newcelica.org and type in code P1692 in the search box and you will be able to find forums from ANYONE and EVERYONE who has experienced this problem, im suffering from the same code! lol, good luck
Read full answer
Apr 12, 2010 • 2002 Toyota Celica
1helpful
1answer

How to instal serpentine belt Toyota celica 2001
Removal & Installation
  1. Remove the right hand cover under the engine.
  2. Turn the drive belt tensioner clockwise to relieve tension on the belt.
  3. Remove the fan and generator V belt.
  4. Return the tensioner to the unloaded position.

    NOTE When retracting the tensioner, turn it clockwise slowly in 3 sec. or more. Be sure not to apply force rapidly. After the tensioner is retracted all the way, do not apply force any more than necessary.

To install:
  1. Turn the drive belt tensioner clockwise
  2. Install the belt.
  3. Install the right hand cover under the engine.
Read full answer
Feb 27, 2010 • 2001 Toyota Celica
1helpful
1answer

My wife has an 200 model Toyota Celica with
I believe the Celica has a belt and it should be inspected every 100,000 miles or so. You can inspect it yourself and as long as there is no missing teeth on the belt or cracks it shouldn't need replacing. Good luck to you
Read full answer
Oct 16, 2009 • 2002 Toyota Celica
0helpful
2answers

How do you install a serpentine belt on a 2001 Toyota Celica GTS
ask auto zone for the diagram in which the belt goes back in it should also be under the hood by the radiator
Read full answer
Oct 04, 2009 • 1998 Toyota Celica
0helpful
2answers

Knocking noise from valve lifters , car was low on oil replaced oil will it correct itself
These engines were overhead cam.If you did put the oil back in as you said and the noise went away,no initial problem.The noise from the lifters, if its still there, is a ongoing problem.Maybe just an adjustment of the lifters needs to be done.Hope this helps
Read full answer
Sep 08, 2009 • 1999 Toyota Celica
0helpful
1answer

Is it advisable to change a serpentine belt yourself or to have a pro do it?
i have a 2002 Toyota celica with fan belt jamed and stop the engine
Read full answer
Jul 28, 2008 • 2002 Toyota Celica
Not finding what you are looking for?

View Most Popular

2002 Celica

  • Cars & Trucks

Related Question

95 Toyota celica 1.8 no power steering and as if it was overheating quickly when I looked it seems at least 1/3 serpentine belts are missing can u please tell me what belts and how to replace them

  • Toyota Cars & Trucks

122 views

Ask a Question

Usually answered in minutes!

Popular Questions

Toyota dashboard CD player won't eject

2003 Toyota Celica

What does trip A mean

Toyota Celica Cars & Trucks

How do you replace a thermostat on a 2002 toyota

Toyota Celica Cars & Trucks

P0440, P0441, P0446

2000 Toyota Celica

I had my car inspected and received P0420 code?

2000 Toyota Celica

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 2002 Celica Manual

2002 Celica

Loading...