2005 Ford Focus 2.0 Logo

Related Topics:

A
Anonymous Posted on Apr 03, 2014

2006 ford focus speed sensor - 2005 Ford Focus 2.0

5 Related Answers

Anonymous

  • 6 Answers
  • Posted on Jan 01, 2009

SOURCE: cant find 2002 ford focus speed sensor

I had a 2001 and the transmission was not shifting correctly that was diagnosed as a speed sensor issue.

There is a speed sensor on the transmission, near the rear.

And there is a speed sensor on one of the front wheel hubs...

Tell me what the problem is?

Ad

Anonymous

  • 122 Answers
  • Posted on May 28, 2010

SOURCE: 2006 ford focus reset engine light...

the only way is to connect with a ecu analyzer-programmer to a authorized or specialized service garage to find the cause and reset the ecu.

Anonymous

  • 632 Answers
  • Posted on Jul 21, 2010

SOURCE: 2006 ford focus rear brakes

If the piston is stuck out this is due to a seized calliper however a temp Fix is to turn the piston clockwise to force it back in as rear callipers are self releasing so they need to be turned clockwise they will not go stright back without turning. This is due by broken calliper seals although you will temp fix it, It's best to either replace calliper or buy a calliper fixing kit which includes all the seals that need replacing.
Also You will need to Empty the brake fluid out to make it easier to push the piston in it, Then you will need to bleed the whole brake system once fitted back.

Rod Herzog

  • 34 Answers
  • Posted on Jul 30, 2010

SOURCE: 2006 ford focus airconditioner couldn't cool contineously

Sounds like it needs a coolant recharge. Many parts shops in the US will sell DIY AirCon recharge kits. Check the DIY sites, but basically, you can do this recharge without opening the hood-I believe the high-pressure connection is in the left side front wheel well.

Anonymous

  • 28 Answers
  • Posted on Nov 09, 2010

SOURCE: where is the mass air

The mass air flow sensor will be fitted in the pipe work that comes from the air filter housing. Find the air filter housing and in the round pipe that goes towards the engine, there will be a wiring connector. this will be connected to your mass air flow sensor. Hope this helps

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2007 Ford Focus speed sensor locations.....all of them please?

https://www.google.com/search?q=2007+Ford+Focus+speed+sensor+locations

Where is the 2007 ford focus speed sensor located?

Vehicle History https://www.vehiclehistory.com > questions > where-is...
Located on the right side of the transmission near the output shaft. Like. (1). Leave your answer.
2 answers · Top answer: The 2007 Ford Focus speed sensor is found by watching: https://www.Youtube.com/watch?v=jxqItE9OI20 You will come into many issues with an engine. A gasket ...

2007 Ford Focus Sensor Locations

Rick's Free Auto Repair Advice https://ricksfreeautorepairadvice.com > 2007-ford-foc...
Oct 3, 2018 - Wheel Speed Sensor (Left Rear) (Wagon) At left rear wheel. Wheel Speed Sensor (Left Rear) (3 Door) At left rear wheel. Wheel Speed Sensor (Left ...
0helpful
1answer

Where is located the 2006 ford focus of 2.0 engine coolant module temperature sensor

It doesn't have a coolant sensor it has a CHT, cylinder head temperature sensor. This type of sensor is much more precise measuring engine operating temperature.
1helpful
1answer

Ford Focus c max 1.8 petrol idle problems

This can be caused by a defective Maf sensor and coolant sensor, they will not trigger a code because as long as there is a signal the computer doesn't know the actual engine running condition enough to say the signal from the 2 sensors is wrong, this goes double for MAF sensors, another area is the idle speed control motor.. I want you to read about the problem at the link below.

Ford MAX 2003 2010 03 1 8 Unstable Idle when slowing Technical matters...
0helpful
1answer

2006 ford focus idle speed too low when cold

Have you replaced the spark plugs and wires? Also,a dirty MAF sensor can play hob with your idling.
GENTLY clean the wires in the MAF sensor with a MAF sensor spray and a clean fine-haired brush. My electric shaver brush(long haired side)workedreally well on mine. You'll hafta buy a
special torx set with the holes drilled in the ends.Look at the screws holding the MAF sensor and you'llsee what I mean. Hope this helps! Don-ohio (:^)
0helpful
1answer

Can you tell me where vechile speed sencor 'A' is on my focus st the fault code is P0500

P0500 Vehicle Speed Sensor "A"
P0501 Vehicle Speed Sensor "A" Range/Performance
P0502 Vehicle Speed Sensor "A" Circuit Low Input
P0503 Vehicle Speed Sensor "A" Intermittent/Erratic/High
Vehicle Speed Sensor Removal & Installation Automatic Transmission To Remove:
  1. Remove or disconnect the following:
    • Output shaft speed (OSS) sensor electrical connector.
    • Bolt and OSS sensor
To Install:
  1. Apply a light coat of petroleum jelly to the O-ring before installation
  2. Install or connect the following:
    • OSS sensor torque bolt to 89 in-lbs (10 Nm)
    • OSS sensor electrical connector
Manual Transmission To Remove:
  1. Remove or disconnect the following:
    • Vehicle Speed Sensor (VSS) electrical connector.
    • Retaining pin.
    • VSS.
To Install:
  1. Install or connect the following:
    • VSS.
    • Retaining pin.
    • VSS connector.
---
The VSS is on the transmission near the output shaft. It will not be a wheel speed sensor on the hub.

Good luck on this repair, tommy.
1helpful
1answer

My esp light is on all the time and lost power

Quite likely to be the ABS wheel speed sensor, they are common to fail on Focus C307 (mk2)

Get code read to confirm
7helpful
1answer

How to install a transmission speed sensor on a 2003 ford focus

SAFELY RAISE SUPPORT CAR ON JACK STANDS.THE SPEED SENSOR IS LOCATED ON THE OUTPUT SHAFT HOUSING.ALL YOU HAVE TO DO IS DISCONNECT ELECTRICAL CONNECTOR AND REMOVE SPEED SENSOR SCREWS AND THEN REMOVE SPEED SENSOR.
0helpful
1answer

2006 Ford Focus Wagon suspension

My 2006 ZXW SES has worn front end linkages @ 48000 km, being replaced today, not covered by warranty according to Ford dealer
0helpful
1answer

Iv got a amber light comming on right hand side of dash.its a ford focus left hand drive

gearbox speed sensor needs replacing, watch for it snapping and dropping into gearbox an expensive fix otherwise best to let leave it to a mechanic not expensive
Not finding what you are looking for?

145 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...