SOURCE: cadillac cts cranks but won't start
My 2003 CTS would not start on the first, second or third try after filling the gas tank. Finally after several months of this occuring every two weeks a check engine light came on. It was the evac purge valve. Tom
SOURCE: what is the firring order for 2006 Cadillac cts
Firing order 1-2-3-4-5-6 ------- front | 1 3 5 | of | | vehicle | 2 4 6 | ------- distributorless ignition NOTE THIS IS FOR THE 3.6L
SOURCE: 2003 Cadillac CTS. Shift linkage makes metallic
Just had the same problem. The problem is that the rubber bushing on the transmission linkage deteriorates and falls off. This causes two problems - shifter is loose and a metallic clunking sound is heard when shifting. It's not the shifter inside the car. It's the linkage underneath the car. You have to buy the bushing (if sold by itself) or the linkage kit. The linkage is on the passenger side of the transmission between transmission and right side exhaust pipe. Ensure engine/exhaust is cold prior to trying to access. Regards.
SOURCE: 2003 Cadillac CTS - the car won't shift from park
sounds like you have a bad brkae light switch, which is located on the brake pedal assembly. a bad switch will not let you shift out of park and you will not have any brake lights as the car does not recognize that the pedal is being pushed and brakes engaged. easy to replace switch if you are handy, if not this is a inexpensive repair at any mechanic. hope this was helpful is so please rate 4 thumbs.
SOURCE: hi my 2006 cadillac cts
P0300-Random/Multiple Cylinder Misfire Detected
Causes:
- Improper spark plug
- Insufficient compression
- Incorrect fuel pressure
- The injector circuit is open or shorted
- Fuel injectors may be faulty
- Intake air leak
- The ignition signal circuit is open or shorted
Solutions:
- Perform Injector Service
- Replace Spark Plugs
- Replace Injectors
- Replace Ignition Coils
P0303 - Cylinder 3 Misfire Detected
Causes:
- Improper spark plug at cylinder #3
- Insufficient compression at cylinder #3
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #3
- Fuel injector #3 may be faulty
- Intake air leak at cylinder
Solutions:
- Perform Injector Service
- Replace Spark Plug #3
- Replace Injector #3
- Replace Ignition Coil #3
P0305 - Cylinder 5 Misfire Detected
Same info as P0303
P0343 - Camshaft Position Sensor Circuit High Input
Causes:
- Harness or connectors (The sensor circuit is open or shorted)
- Camshaft position sensor may be faulty
- Camshaft (Intake) may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead (Weak) battery
Solutions:
- Charge battery
- Repair harness or connector
- Replace Camshaft Position Sensor
P0347 - Not a valid DTC
P0368 - Not a valid DTC
P0392 - Not a valid DTC
P0496 - Not a valid DTC
439 views
Usually answered in minutes!
×