Eventually the ignition works
CHECK,JUST FOR A GOOF, THE BODY CONNECTOR OF NEG. BATTERY CABLE. BESIDE PCM AND POSITIVE BATTERY POST. DOWN ON INNER FENDER YOU'LL SEE A 10MM BOLT AND THE ROUND CABLE END. I HAD ONE IN FOR REPAIRS, AND FROM FACTORY, FENDER WAS PAINTED AND BOLTNOT CLEAN BUT DARK-GREYISH. REPLACED BOLT AFTER SCUFFING UP FENDER AND CABLE-END AND THREADED HOLE AND PUTTING ELEC. GREASE ON IT, TA-DA. ALL POWER RESTORED.
SOURCE: Got back from work turned off truck. When i got
battery could be dead if not alternator could be shot and needs to be replaced
SOURCE: Engine won't turn over, no clicking or anything.
The Only Thing I Have Seen That Fixes This Problem Is The 500.00 Key Switch. That's Some Switch!
139 views
Usually answered in minutes!
×