Cars intake manifold torque specs

Intake Manifold Torque specs? - Maxima Forums

https://maxima.org > 4th-generation-maxima-1995-1999
Jan 25, 2017 - What do you torque the intake manifold to? ... My haynes manual says to torque the upper manifold bolts to 13-16 ft/lbs ... Supporting Maxima.org Member.
valve cover and intake plenum bolt torque specs - Maxima ...
Mar 19, 2020
Valve Cover Torque Spec. - Maxima Forums
Oct 31, 2004
2000 upper intake manifold collector removal - Maxima Forums
Jan 25, 2017
01 Maxima - harmonic balancer bolt torque spec please
Aug 9, 2015
More results from maxima.org

VIDEOS as well

https://www.google.com/search?q=Intake+manifold+torque+specs+for+2013+maxima

..

Question edited for clarity.

6 to 8 ft lbs. It is so little is is measured in INCH pounds. 72 in/lbs is the torque, which equates to 6 ft/lbs.

2015 Dodge Journey 3.6L Engine Torque Specs

dodge-specs.com https://dodge-specs.com > cars > 2015 > journey3.6

The intake manifold bolts can be torqued down to 8 ft-lbs regardless as to whether it is the lower or upper manifold. The ignition coil assembly can be torque ..

..

http://www.fixya.com/cars/t26579065-need_torque_specs_valve_cover_bolts_2001

Check this post for the specs.

Spark plug torque on the 3.0L engine is 13 ft.lbs. and the 3.3L is 18 ft.lbs.

Valve covers-69 inch lbs.

Intake Manifold-11 ft. lbs.

The torque specs are
-for intake manifold-to-cylinder head bolts/nuts
1996 and later-----132 in-lbs
-for intake manifold, upper to lower bolts
1995 and later-----89 in-lbs
-for cylinder head bolts
2001 and later----step 1--37
step 2--Turn an additional 120 degrees
I hope that this helps you out.

copy and paste
https://www.justanswer.com/ford/2w39p-need-upper-lower-intake-manifold-bolt-torque-specs.html

https://www.justanswer.com/ford/1vuu6-need-lower-intake-torque-specs-2001-ford-windstar.html

intake manifold upper and lower 89 in. lbs.

valve cover 89 in. lbs.

Fig. Intake manifold bolt torque sequence 2.7L engine

Upper intake manifold with a new gasket on the lower intake manifold and torque the bolts, in sequence, to: 105 inch lbs. (12 Nm)

Hope helps (remember to rate this answer). Good job.

(step 1 ) the torque specs for the heads are---1998 through 2001 are 37 foot lbs. ( step 2) rotate an additional 90-degrees (1/4 turn). intake manifold bolts ( lower ) step 1-- 62 in-lbs, step 2--115 in-lbs. intake manifold bolts/studs ( upper ) 18 ft-lbs. this is for the 3.1 v-6, have a good day!

Intake Manifold Coolant Pipe Bolt .... 89 in lbs (7.4166 ft. lbs)
Lower Intake Manifold Bolt .............. 115 in. lbs (9.5833 ft. lbs)
Upper Intake Manifold Bolt/Stud ...... 18 ft. lbs
Valve Rocker Arm Bolt ................... 168 in. lbs (14 ft. lbs +30 degress