Airbag light on

Question edited for clarity.
Question moved to model category.

Resetting the airbag light on your Chevy Silverado should be easy to do. Follow this video to watch it being done in a Chevy Silverado. To start with, you will:

• Put the key into the ignition
• Turn the key to the "on" position
• Wait for the airbag light to turn on
• Wait to continue until the airbag light turns off (around seven seconds)
• Repeat the same steps twice more
• Turn on your engine

After you take these steps, your airbag light should turn off. If it doesn't do so, then you should consider taking your vehicle in for diagnostic testing.

If the airbag light remains on, it could mean that something in the system is faulty. That could mean the airbag, the computer wiring, or another issue. Oftentimes, when the airbag light comes on unexpectedly, it is because of interference with the switch.
Feb 12, 2021

How Do I Reset the Airbag Light on the Chevy Silverado?

Vehicle History https://www.vehiclehistory.com > articles > how-do-i-res...
..

Question edited to fix.
Question moved to model category.

If it is random, it may be a bad clock spring.

Why wont my airbag light go off? Go to see an auto-electrician if the airbag light still won't turn off. A worn-out clock spring inside your airbag's control module, a dead backup airbag battery, or a corroded terminal inside the airbag system are commonly the reasons why the airbag light is illuminating. In rare cases, your airbag may need to be serviced.
Dec 10, 2022

How to reset airbag light in six simple steps - Student Lesson

This car has a "Smart" Airbag system control module, if the passenger is not over 50 pounds then the system senses that and the airbag is turned off automatically. So you can't turn it off.

First the airbag system can be dangerous to work on and it is usually best to consult a professional since to accidental inflation of an airbag can cause injury, do not cut any wires and disconnect the battery when working on the system.
When the airbag light is on it disables the airbag system inmost vehicles meaning if there is a collision the airbags will not deploy. Some autoparts stores can check codes which is where to start with the warning light on and modular connected check the airbag trouble codes with this information it will be easier to diagnose the system and the cause of your problem. I hope this helps

The light for the Airbag/SRS system is on because the system control module has sensed a fault and turned off the airbag SRS system. What you must do now is have a scan done of the airbag module to see what fault codes show up in the airbag modules memory.

{: ) If the airbag light goes off after that 7 blinks (some are 6 or 8), that will be normal. The airbag module will blink the airbag warning light on the cluster while performing self-test during initial start-ups. After the self-test and the airbag module did not detect any fault within the airbag system, it will turn the warning light off. If the airbag warning light continuously blink or stayed lit after the expected elapse time, then there is really a concern and you need to double check the airbag system with a scan tool.

There is a recall for this problem.

Hello
My son races a neon on dirt fast car!=srt mopar stage 3 turbo kit,,, 3" exaust etc,,,
I would just remove tha airbages from the car there flamable if for some reason you have a fire they will go off even not conected.
drivers just unbolts from the wheel 4 10 mm bolts
pasanger bag have to go threw the glove box again 4 10 mm bolts
let me know if i can help more

There is a door actuator motor that is not working for that side,the dash will have to be removed,and pulled back into the seats to replace the actuator motor.

sounds like fuseblock underhood is faulty..front control module is on fuseblock