Question about 1995 Lexus LS 400

1 Answer

Changing 1996 Lexus LS400 headlight bulb.

I have the bulb to change out the low beam for a 1996 Lexus LS400 headlight but do not see an easy way to access the back of the lamp. What is the easiest way to access the back of the headlamp?

Posted by jules_wilson on

  • Anonymous Mar 13, 2014

    on a 1996 ls400 lexus transmission does not lock up and i am getting ap0500 code

  • Anonymous Mar 13, 2014

    How to change crank seal in a 1993 lexus ls400

×

Ad

1 Answer

Mike Vincent

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Lexus Master
  • 358 Answers

You have to remove the head lamp. there are 4 bolts that hold it in. you will have to remove ouyer marker lens first.1 screw on top and pull forward. clips hold lens pretty tight.

Posted on Jun 16, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My low beam headlights on my 2004 lexus rx330 are too high they blind onlooking traffc


Check you have load adjuster in cabin on 0.
if you have recently changed bulbs check they are aligned properly it is quite easy to get some types upside down. The cup shaped bit in the bulb should be under the filament (not on top)

Feb 01, 2015 | 2004 Lexus RX 330

2 Answers

No headlights only high beams


Both the low beam bulbs must be defective.
People at Jiffylube change headlight bulbs while you wait, if you are not up to the task.

Dec 02, 2010 | 2002 Chevrolet Impala

1 Answer

How to change headlight bulb on 1998 es300


open your hood look behind the headlight you will see various cables depending on high or low beams are the cables you need to fallow the projector beam is low beam and the hallogen is high beam look for the clip that holds it in place do not touch new bulb with fingers this will damage the bulb use a paper towel or such to install nothing is to touch bulb or the life of the bulb will be shortened by residue left on it

Apr 01, 2010 | 1998 Lexus ES 300

1 Answer

How do I replace a headlight bulb in my 1996 Olds achieva


How to Replace a Headlight Bulb
(DIY Complexity: Easy / Time: 0.9 hour)

Parts:
1. Headlight Bulb

Tools:
1. Screwdriver
2. 1/4 in. Drive Ratchet
3. Socket Set

0fc6099.jpg

HIGH PERFORMANCE HALOGEN HEADLIGHT BULB -- Low 45/high 65 watts, Dual C-8 filament for both high beam and low beam; 100 percent legal halogen headlight bulbs; Features the whitest and brightest light color similar to daylight for safer night driving; Meets all US FMVSS 108 and Canadian CMVSS 108 requirements.

Steps:
Step 1 Open the hood and locate the headlight assembly.
o Tip: Most headlight assemblies have a place in the rear to gain access to the headlight bulb.
o Tip: It is recommended that headlight bulbs are replaced in pairs.
o Tip: Always make sure the struts on the hood can fully support the weight of the hood so that it does not close on you while working. The use of a hood prop can securely hold it in place.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 Gain access to headlight bulb.
o Tip: It is a good idea to check the high beam and low beam headlight bulbs at this time.

Step 3 Disconnect the wiring harness and replace the old headlight bulb with a new one.

35e674e.jpg

Remove the retaining ring from the base of the bulb, then...


99dfc4e.jpg

...turn the bulb and remove it from the headlight assembly.

Step 4 Turn on the headlights and check high and low beams to verify repairs.


Hope this help (remember comment and rated this).

Mar 30, 2010 | 1996 Oldsmobile Achieva

1 Answer

How do I adjust headlights on 2005 lexus LS430


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

May 06, 2009 | 2005 Lexus Ls 430

1 Answer

HID low beam headlight replacement for 2003 lexus es300


The HID bulbs are very easy to change, and can be bought online for much less than from the dealer. Check sites like xenondepot and Ebay for Phillips D2R (for reflector headlamps) HID bulbs and you can replace them yourself.

May 04, 2009 | 2003 Lexus ES 300

Not finding what you are looking for?
1995 Lexus LS 400 Logo

2,346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Mike

Level 3 Expert

4372 Answers

Brad Brown

Level 3 Expert

18596 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...