2009 dodge charger car alarm disable2009 dodge charger car alarm disable
AnonymousMar 18, 2014
My Clifford G5 Alarm Enables Itself When I Start Driving and I Have To Constantly Use The Alarm Pad To Disable It Other Wise It Will Go Off While I'm Driving!!! What do I do ??My Clifford G5 Alarm Enables Itself When I Start Driving and I Have To Constantly Use The Alarm Pad To Disable It Other Wise It Will Go Off While I'm Driving!!! What do I do ??
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Battery removal will not work. What will work is this: Use key to lock and then unlock driver's side door. I unclipped both horns at passenger side of engine compartment at front because they will go off while you are doing this procedure. I used this procedure last night after a rear passenger accidentally set of my alarm. I know this works! My vehicle is a 99' Durango.
Hi, if the alarm is armed the car not going to start,it might start and shut right back off. Have you shut all doors and hood down , take your key and lock and unlock car this should disarm alarm system.If dont work on driver side try passanger side. You might have remote reprogram. and if none of this work for you if you can stand the noise put key in switch and turn to run and leave it on for 30 mins. If i can help you futher just re post.
Thanks dodge tec
If it is an after market, you need to have it taken out, but either way, you have to make a choice of whether you want it to keep causing you problems or take it to a reputable Tech and get it fixed.
the BMW is complicated since i had a similar problem with mine. the keypad is connected partly to the ECM and the TDS. the connector to the keypad partially gets corroded over time and wont send the correct signal to disable the alarm. Check the connection first. if it is fine. disconnect the power to the battery for 5 minutes to let the TDS reset and try again. if it fails then chances are the key pad is faulty
2009 dodge charger car alarm disable
My Clifford G5 Alarm Enables Itself When I Start Driving and I Have To Constantly Use The Alarm Pad To Disable It Other Wise It Will Go Off While I'm Driving!!! What do I do ??
×