Question about 2000 Hyundai Sonata
Well about 2 weeks ago my car broke down and apparently my fuel pump went out so i replaced that and then when he was fixing it he noticed my fuel line had busted so after replacing this part we tried to start the car and all it does is crank...its not getting any spark what so ever so he said it might be the crankshaft position sensor- ignition misfire sensor...could this be what is or will i be wasting my money purchasing this?
OK!... Tell you STRAIGHT UP!.. this is a GUESSING GAME online. Fuel Pump failure 'apparent'?.. Did anyone VERIFY it was the fuel pump? Unless you guys know what you're doing, you need an EXPERT's EYE and BRAIN on this one -- it could be almost anything!.. Does the Check Engine light come ON when this happens? Whenever the "Check Engine" light comes on, there is always a DTC (Diagnostic Trouble Code) stored in the ECM (Engine Control Module). You'll need an OBDII (On-Board-Diagnostics) scanner to retrieve any codes recorded/set in ECM. Once you do this and let us know what, if any codes are set, then we can go from there... otherwise it's a GUESSING GAME! There are too many possible causes which prevent a SPARK (i.e., fuse, ECM, Wiring, ignition failure sensor, bad CKP (crank position sensor), out of time, etc.
Posted on Jun 14, 2009
Where is the crankshaft position sensor located on a 2000 hyundai sonata 4 cylinder
Posted on Oct 08, 2009
Tips for a great answer:
Mar 19, 2016 | Hyundai Cars & Trucks
May 27, 2015 | 2000 Hyundai Sonata
Nov 06, 2017 | Cars & Trucks
Apr 26, 2014 | Hyundai Motor 2004 Sonata
Mar 30, 2011 | 2001 Hyundai Sonata
Feb 12, 2010 | 2001 Hyundai Sonata
Jul 28, 2009 | 2000 Hyundai Sonata
807 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: