1992 metro the signal light is not working - 1992 Geo Metro

unscrew lens and bingo.
front or rear.
and all this is in the operators guide of any cars.
lost that, get one, and not be trying to find rare car facts.
or here.
http://geometroforum.com/site/


http://geometro.org/index.php

The right blinker doesn't have it's own fuse. If the left works, but not the right, it's either one of the bulbs, a plug, a wire, or the turn signal switch. If the back or front turn signal works, start with the bulb that's not lighting; it's by far the most likely culprit.

Check the oil pressure switch. It may not be sending a ground signal to the computer.

the front lights for the park lights work off of a separate filament and wire circuit than the signal light.you may just need to replace the bulbs at the front of the car.it may also be a bad socket for the signal lights only and not the park lights.

sounds like it's running on the battery,have the alternator checked now.









TIM..........

the bulb is most likely burnt.
get a new bulb

may be low on fluid as that wont shift the pistons in the valve body of the transmission
due to no fluid pressure!

Find out why the light is on, as this is most likely the problem.

your right flasher switch is damage that's why it cant locked when you toggled it. try to clean it and check if the lock is still there.

There is probably something shorting the front turn signal wires; the car is supposed to turn the signal light circut on and leave it on if it detects a burned out light bulb. The flashers, however, are supposed to work normally no matter what happens.
Hope this helps!