Question about 2007 GMC Yukon

Open Question

My cruise control on my 2007 gmc yukon shuts itself off while engaged

While I'm driving my cruise controls shuts itself off while engaged

Posted by Linda Opp on

Ad

1 Related Answer

mrgreenz

Daniel Arellano

  • 962 Answers

SOURCE: 2007 GMC Yukon Cruise Control

Check the speed sensor. Look up the location at autozone .com or google. It is either near the tranny or at the passenger side wheel. The speed sensor is almost always connected to cruise control problems.

Posted on Dec 16, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The cruise control in our GMC Yukon will not engage


What is model year? Do the brake lites work? If not, I don't think the cruise will work either.

Can you check for applicable trouble codes? Some of the national brand auto stores will check codes for free. Also, I'd have to check applicable fuses, the control button on steering column, the cruise wiring in the steering column. Cruise linkages, where applicable.

I can't look up wiring diagram w/o model year.

Nov 25, 2015 | GMC Cars & Trucks

1 Answer

Cruise control for 2008 Yukon XL


The most common problem is brake light switch, assuming all other items are ok.

Feb 23, 2015 | 2008 GMC Yukon XL

1 Answer

Cruise control won't turn off


by cruise control being PCM control have dealership code scan see what causing cruise control turn itself on.

Apr 18, 2013 | Infiniti Cars & Trucks

1 Answer

The cruise control in my 2007 GMC Denali XL always works for me and never works for my husband.


no reason for working for one and not the other
maybe it is how he drives
left foot resting on the brake pedal will not allow the cc to work as it takes very little to make the cc sensor disengage the control

Apr 18, 2017 | GMC Cars & Trucks

1 Answer

97 yukon high beams shut off and then back on


I's possibly a bad ground at your harness or your multifunction swith could be going bad. this is your main control for your wipers bright dims as well as cruise control.

Jun 24, 2012 | 1997 GMC Yukon

2 Answers

How to fix cruise control


Cruise controls can cease to engage if the clutch or brake light cruise switch are out of adjustment. If this happens, try placing you foot under the clutch pedal (if equipped) and lift up on it (toward you) and hold it while engaging the cruise. If it now works, it will likely cut out when you remove your foot from under the pedal. Check the brake pedal in an identical fashion. Adjusting the switch at the pedals can often solve he problem. Some vehicles (Honda, Acura, Ford, to name a few) have a plastic insert that mounts in the pedal arm which presses against the switch. These can become brittle and fracture into pieces. My Acura has little pieces of blue plastic on the floorboard around the brake pedal one afternoon and I noticed the cruise didn't work. It was the pieces of the insert that had come to pieces preventing the cruise from coming on. I replaced the insert and no more problem with the cruise.

Mar 10, 2012 | 2003 GMC Sierra 2500HD

1 Answer

2007 GMC Yukon Cruise Control will not engage. Brake lights are working properly. Cruise control light is on but indicator on dash does not appear.


Check the speed sensor. Look up the location at autozone .com or google. It is either near the tranny or at the passenger side wheel. The speed sensor is almost always connected to cruise control problems.

Dec 16, 2009 | 1999 GMC Yukon

1 Answer

My cruise stopped working on my 1991 GMC Sierra 1500 while I was driving. I did a continuity test on the brake switch and it works fine. Any ideas?


Check your cruise control fuse or relay. It will be in your owners manual. If fuse is good than the cruise itself may be faulty. Check continuity on cruise controler itself. If there is power, than the controller itself is bad and need to be replaced. If there is no power than it may be a faulty switch.

Apr 24, 2009 | 1991 GMC K1500

1 Answer

The cruise control on my 1993 Yukon is hard to engage and sometimes jumps right back out after it does engage. Can you give a reason for it doing that?


There are a few things that can cause it. One which may sound stupid is actually valid on a lot of cars - if you have a burned out brake light bulb, some cars will not allow the cruise to be set. Make sure all of your bulbs are working right.

You could also have a failure of the cruise control buttons. On my Audi, the cruise control is on a stalk on the column, and is known to overheat and fail. A search of the internet should reveal if this is a known issue on your model year Yukon. Search "cruise control failure Yukon" and see if something comes up - chances are there is information out there that will tell you if this is something that is typical of your vehicle.

Jul 21, 2008 | GMC Yukon Cars & Trucks

Not finding what you are looking for?
2007 GMC Yukon Logo

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...